We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Facile Prepared Fe3O4 Nanoparticles as a Nano-Catalyst on photo-Fenton process to remediation of methylene blue dye from water: Characterisation and Optimization
Summary
Researchers synthesized Fe3O4 nanoparticles via co-precipitation and evaluated their performance as nano-catalysts in a photo-Fenton process for degrading methylene blue dye from water, optimizing experimental conditions including pH, H2O2 concentration, catalyst dosage, and dye concentration under solar light.
In this research, a simple method for the preparation of Fe3O4 nanoparticles (Fe3O4NPs) with an average size of 38.05 nm via co-precipitation was investigated. X-ray diffraction (DRX), scanning electron microscopy (SEM), and infrared spectroscopy (FT-IR) were used to characterize obtained Fe3O4 nanoparticles. These Fe3O4NPs were then used as nano-catalysts to degrade Methylene Blue (MB) in an aqueous solution via the Photo Fenton-like process. Also, under room solar light and low temperature, the photocatalytic activity of Fe3O4NPs for degrading MB was optimized through various experimental factors such as pH (ranging from 2 to 8), H2O2 concentration (from 10-2 to 5 × 10-1), catalyst amount (20 to 60 mg), and target organic compound concentrations (10 to 40 mg/L). The optimal experimental conditions were found to be a pH of 3, a dye concentration of 40 mg/L, and 40 mg of Fe3O4NPs as nano-catalyst. These conditions led to a high degree of removal (>86%) of MB dye from water. The pseudo-second-order kinetic model was the suitable model to describe the degradation of MB dye with a coefficient value of 0.969. From this, it was concluded that Fe3O4NPs could act as an effective nano-catalyst for a sustainable and environmentally friendly way to eliminate organic pollutants in water and wastewater. Keywords: Fe3O4Nps, structural characterization, BM degradation, photo-Fenton Oxidation process, pseudo-first-order Model, Nanocatalyst.
Sign in to start a discussion.
More Papers Like This
Photocatalytic Degradation of Methylene Blue Dye by Promising Zinc Copper Ferrite Nanoparticles for Wastewater Treatment
Researchers synthesized copper-zinc ferrite nanoparticles and tested their ability to break down methylene blue dye in wastewater using photocatalysis. They found that the nanoparticles effectively degraded the dye under light exposure, demonstrating strong potential for water treatment applications. The study presents a relatively simple and cost-effective approach for removing harmful dye pollutants from industrial wastewater.
Effective Removal of Methylene Blue by Mn3O4/NiO Nanocomposite under Visible Light
Researchers synthesized manganese oxide and nickel oxide nanocomposites and tested their ability to remove methylene blue dye from wastewater under visible light through photocatalysis. The study found that the nanocomposite effectively degraded the dye, demonstrating a low-cost approach to wastewater treatment that could help address water pollution challenges.
Merits of photocatalytic activity of synthesized (ZnxCu(1−x)Fe2O4); x = (0–1) magnetic nanoparticles for wastewater treatment
Researchers synthesized zinc copper ferrite nanoparticles using a co-precipitation method and evaluated their photocatalytic performance for degrading methyl orange dye in wastewater. They found that the optimized nanoparticle composition achieved significant dye degradation under UV light exposure. The study suggests these magnetic nanoparticles could serve as reusable photocatalysts for treating dye-contaminated wastewater.
Optimization of methylene blue dye degradation using heterogeneous Fenton-like reaction with Fe3O4 nanoparticles/PVDF macrospheres: A response surface methodology approach
Researchers characterized polypropylene microplastics using SEM and FTIR analysis, finding irregular shapes with cracks and a size distribution of 14-96 micrometers, and tested sodium lauryl sulfate at 5% concentration as an effective dispersant for improving stability in suspension. The study provides foundational insights into polypropylene microplastic physical and chemical properties relevant to toxicological testing and environmental fate studies.
Fenton and solar Fenton processes: inexpensive green technologies for the decontamination of wastewater from toxic Rhodamine B dye pollutant
Not directly relevant to microplastics — this paper evaluates Fenton and solar Fenton oxidation processes for degrading Rhodamine B textile dye in wastewater.