We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics attenuation from surface water to drinking water: Impact of treatment and managed aquifer recharge – and identification uncertainties
AI summary Read the abstract
Researchers tracked microplastics (larger than 20 micrometers) through six stages of a Managed Aquifer Recharge drinking water system and found progressive attenuation at each treatment stage, though some microplastics persisted into the final drinking water.
River water can be used to recharge aquifers exploited for drinking water production. Several recent studies reported microplastics (MPs) in river water, and therefore, the potential contamination of groundwater by MPs is a growing concern among stakeholders and citizens. In this research, we investigate the fate of MPs (> 20 μm) along six different stages of a major Managed Aquifer Recharge (MAR)-water supply system in Switzerland. About 20 l of water were filtered using steel meshes at each location in triplicates. In the laboratory, MPs deposited on the anodisc filters were identified using Focal Plane Array (FPA) micro-Fourier-Transform-InfraRed (μFTIR) spectroscopy. The obtained hyperspectral data were processed using the imaging software Microplastics Finder for MPs identification and classification. Our results revealed a 20-fold decrease in MPs concentration from the Rhine River bed water (112 ± 27.4 MPs/l) to after the coagulation, flocculation and sedimentation (5.5 ± 2.2 MPs/l), a further 3-fold decrease to after the sand-filtration system (1.8 ± 0.9 MPs/l), corresponding to an overall removal efficiency of 98.4 %. The MPs concentrations remained low following MAR (2.7 ± 0.7 MPs/l) through a Quaternary gravel aquifer. Activated carbon filters did not substantially further reduce MPs concentrations. The percentage of fragments (≈95 %) prevailed over fibers (≈5 %) at all locations, with fibers being longer and more abundant in the river water. Overall, this study demonstrates the effectiveness of the treatment systems to remove MPs larger than 20 μm. Finally, we calculated an uncertainty in MPs concentrations of one order of magnitude depending on the user-defined parameters inside the MPs identification and classification model. The Quality Assurance/Quality Control approach followed during laboratory analysis highlighted an accumulation of surrogate particles at the edges of the disc, which would have an impact for MPs number upscaling.
More Papers Like This
Microplastics transport during Managed Aquifer Recharge – A potential cause of groundwater contamination?
AI summary Read the abstract
Researchers measured microplastics at multiple stages of a major managed aquifer recharge system in Switzerland and found that plastic particles from the Rhine River can penetrate through the treatment process into pumped groundwater, raising concerns about drinking water quality.
Fate of microplastics in the drinking water production
AI summary Read the abstract
Researchers tracked the fate of microplastics through drinking water treatment processes, finding that conventional treatment steps like coagulation, sedimentation, and filtration removed the majority of microplastics but did not eliminate them entirely.
Microplastic removal efficiency in a megacity water treatment plant and dynamics in the distribution system
AI summary Read the abstract
This study tracked microplastics through a megacity drinking water treatment plant and urban distribution network, finding significant MP removal through treatment but detecting residual contamination in distributed water, raising public health concerns in rapidly growing urban areas.
Detection and Occurrence of Microplastics through Municipal and Pilot-scale Drinking Water Treatment Plants
AI summary Read the abstract
Researchers developed a new method for detecting and characterizing microplastics in drinking water samples from municipal and private treatment systems. They found microplastics in treated drinking water, though at lower concentrations than in source water, and identified fibers as the most common type. The study demonstrates that conventional water treatment does not completely remove microplastics from drinking water.
Investigating microplastics at two drinking water treatment plants within a river catchment
AI summary Read the abstract
Researchers tracked microplastics through each treatment stage at two Czech drinking water treatment plants on the same river, finding that the downstream plant received far higher raw water concentrations (1,296 vs. 23 particles/L) and that current treatment reduced but did not eliminate microplastics from finished drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.