We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A Comparison of Feedstock from Agricultural Biomass and Face Masks for the Production of Biochar through Co-Pyrolysis
AI summary Read the abstract
Researchers examined the co-pyrolysis of disposable face masks with agricultural biomass feedstocks to produce biochar and bio-oil, comparing product yields and chemical characteristics between the two feedstock types. The study found that face mask co-pyrolysis produced fuel-suitable chemicals while addressing the environmental problem of single-use mask waste accumulation.
This study explores the pyrolysis of disposable face masks to produce chemicals suitable for use as fuel, addressing the environmental concern posed by single-use face masks. Co-pyrolysis of biomass with face mask plastic waste offers a promising solution. The research focuses on the co-pyrolysis of biomass and face masks, aiming to characterise the properties for analysis and optimisation. Selected agricultural biomass and face mask plastic waste were subjected to temperatures from 250 °C to 400 °C for co-pyrolysis. Slow pyrolysis was chosen because face masks cannot be converted into useful bioproducts at temperatures exceeding 400 °C. The samples were tested in four different ratios and the study was conducted under inert conditions to ensure analysis accuracy and reliability. The results indicate that face masks exhibit a remarkable calorific value of 9310 kcal/kg. Face masks show a two-fold increase in calorific value compared with biomass alone. Additionally, the low moisture content of face masks (0.10%) reduces the heating value needed to remove moisture, enhancing their combustion efficiency. This study demonstrates the potential of co-pyrolysis with face masks as a means of generating valuable chemicals for fuel production, contributing to environmental sustainability.
More Papers Like This
A review on co-pyrolysis of agriculture biomass and disposable medical face mask waste for green fuel production: recent advances and thermo-kinetic models
AI summary Read the abstract
Researchers reviewed co-pyrolysis of agricultural biomass with disposable face mask waste as a route to improved bio-oil, finding that mask polypropylene raises fuel quality and yield, while advanced catalytic kinetic models are necessary to accurately describe the complex non-linear reaction mechanisms involved.
Agro-residual biomass and disposable protective face mask: a merger for converting waste to plastic-fiber fuel via an integrative carbonization-pelletization framework
AI summary Read the abstract
Researchers combined hydrothermal carbonization and pelletization to convert surgical face masks blended with agricultural biomass into solid fuel pellets, finding that the resulting composite fuel met quality standards for wood pellets and emitted CO and NOx below occupational safety limits, offering a waste-to-energy pathway for pandemic plastic waste.
Preparing Fuel-Range Chemicals via the Direct and Selective Pyrolysis of Disposable Mask Waste for Sustainable Environment
AI summary Read the abstract
Chemical pyrolysis of disposable facemask waste converts the polypropylene and polyamide components into high-value fuel-range chemicals including liquid hydrocarbon blends, aromatics, and C1-5 gas alkanes, offering a strategy to address mask-generated microplastic pollution while producing sustainable fuels.
Catalytic co-pyrolysis of oil palm empty fruit bunches (EFB) and surgical face mask (SFM) wastes: Thermo-kinetic study, ANN model fitting, and synergistic effect
AI summary Read the abstract
Researchers studied the co-pyrolysis (simultaneous heat-breakdown) of oil palm waste and surgical face mask plastic to convert both into usable fuel, finding that a zeolite catalyst reduced the energy needed for the reaction by about 14%. This approach could help manage the surge of plastic PPE waste that would otherwise contribute to microplastic pollution in landfills and the environment.
Synergistic co-pyrolysis of spent coffee grounds and polypropylene into hydrocarbon-rich bio-oil and carbon-rich biochar
AI summary Read the abstract
Researchers co-pyrolyzed spent coffee grounds with polypropylene plastic waste and found that a 50:50 blend maximizes bio-oil yield at 56 wt% with enhanced hydrocarbon content and heating value, while also producing biochar with improved surface area suitable for soil remediation — demonstrating a viable waste-to-energy pathway for two common waste streams.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.