We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in Influents and Effluents of Estonian Wastewater Treatment Plants
Summary
This Estonian study is the first systematic investigation of microplastic concentrations in both the influent and effluent of Estonian wastewater treatment plants, using continuous filtration sampling and FTIR spectroscopy. The research establishes baseline data for microplastic removal efficiency in Baltic state wastewater infrastructure, documenting how treatment reduces but does not eliminate microplastic discharge.
This study is the first systematic investigation of microplastics in influents and effluents of Estonian wastewater treatment plants (WWTPs) using continuous sampling filtration method and FTIR-spectroscopy [...]
Sign in to start a discussion.
More Papers Like This
Microplastics in Estonian wastewater treatment plants: First evaluation of baseline concentrations and stage-wise removal efficiency
Researchers sampled six Estonian wastewater treatment plants to establish baseline microplastic concentrations in influents and effluents and assess stage-wise removal efficiency. At least 78% of microscopically identified MPs were confirmed by µFTIR spectroscopy, with at least 50% removed during secondary treatment, providing the first baseline data for Estonian WWTP microplastic discharge into the Baltic Sea.
Quantification of microplastic mass and removal rates at wastewater treatment plants applying Focal Plane Array (FPA)-based Fourier Transform Infrared (FT-IR) imaging
This study quantified microplastic mass and calculated removal rates at wastewater treatment plants, finding that while plants remove a large proportion of incoming microplastics, the residual discharge still represents a substantial ongoing input to receiving water bodies.
Microplastics in the effluent of a German wastewater treatment plant ‒ analysis with μ-FTIR spectroscopy
A German wastewater treatment plant was found to release microplastics in its treated effluent, with fibers as the dominant type. The study used detailed chemical characterization and identified wastewater plants as ongoing point sources of microplastic pollution entering aquatic environments.
Characteristics and removal efficiency of microplastics at secondary wastewater treatment plant in Lithuania
A three-month study at a Lithuanian secondary wastewater treatment plant found microplastics at every stage of treatment, with the plant removing a substantial portion but still releasing significant quantities to the environment. Fiber was the most common shape, and the data help fill a geographic gap for northeastern Europe, where microplastic monitoring in wastewater systems has been limited.
Microplastic removal efficiency and polymer characterization in coastal wastewater treatment plants using FTIR spectroscopy
Researchers assessed microplastic concentrations and removal efficiencies at four wastewater treatment plants along the U.S. Gulf Coast, finding that influent contained an average of 3,472 particles per cubic meter while effluent contained 1,372. PET and polystyrene were the most abundant polymers, and plants with advanced filtration or lagoon-wetland systems achieved over 80% removal of these denser plastics, while lighter polymers like polyethylene were harder to capture. Seasonal patterns showed weaker removal during winter months.