Constructing green superhydrophilic and superoleophobic COFs-MOFs hybrid-based membrane for efficiently emulsion separation and synchronous removal of microplastics, dyes, and pesticides

Oil spills and micropollutants have become thorny environmental issues, posing serious threat to ecosystem and human health. To settle such dilemma, this study successfully constructed a robust and environmentally-friendly MOFs-COFs hybrid-based membrane (FS-50/COF(MATPA)-MOF(Zr)/PDA@PVDF) for the first time through solution synthesis and solvothermal method, combined with surface modification of FS-50 molecule. Importantly, we employed a simple two-step strategy to obtain the high-aspect-ratio MOFs fibers: (1) solvent regulation to generate smaller needle-like whiskers during the in-situ growth of MOFs on COFs; (2) high pressure induced directional crystallization in filtration process. The introduction of polydopamine (PDA) greatly improved the adhesion between coating and PVDF membrane. The in-situ growth of high length-diameter ratio MOFs fibers on blocky COFs greatly enhanced the specific surface area of MOFs-COFs hybrid, thus provided sufficient absorption sites. The functional groups of FS-50 endowed the hybrid membrane with superhydrophilicity and superoleophobicity, which facilitated to selectively penetrate water molecules and repel non-polar pollutants. The separation efficiency and decontamination mechanism of hybrid membrane to the simulated oily wastewater (containing various MPs, dyes, and pesticides) were investigated through experiments and theoretical calculations. The hybrid membrane could selectively and synchronously adsorb various dyes (20 mg/L-120 mg/L, almost 100% removal) and pesticides (10 mg/L for DIF and TET, adsorption rates 93.2% and 90.9%, respectively) from oil-water emulsion (50 mL). The large-scale coated sponge (6 cm × 4.5 cm × 3 cm) could quickly achieve separation of oil-water mixture (almost 100%) with a water permeability of more than 162 L m·h·bar, and simultaneously remove various MPs (PP-2000, PP-100, PE-2000, PS-100, 0.2 g/300 mL for each), Sudan Ⅲ (C = 200 mg/L), and DIF (C = 10 mg/L) from a simulant oily wastewater (300 mL), with the removal rates of almost 100% for MPs, 99.7% for Sudan Ⅲ, and 95.8% for DIF. Furthermore, we elucidated the removal mechanism of pesticide and dyes through simulating the theoretical adsorption energy and potential adsorption sites. The hybrid membrane not only provides a promising candidate for the removal of multiple pollutants from oil-water emulsion, but also opens a new strategy for achieving efficient and clean aquatic environment restoration.