We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Retention and Transport of Nanoplastics with Different Surface Functionalities in a Sand Filtration System
AI summary Read the abstract
This study tested how well sand filtration removes nanoplastics with different surface chemistries — a key question since nanoplastics are increasingly detected in drinking water sources. Surface charge strongly influenced whether nanoplastics were retained or passed through the filter, with negatively charged particles being harder to remove.
The efficiency of sand filtration was investigated in terms of the behavior of the nanoplastics (NPLs) with different surface functionalities. The initial condition concentrations of NPLs were varied, and their effects on retention and transport were investigated under a constant flow rate in saturated porous media. The behavior of NPLs in this porous system was discussed by considering Z- average size and zeta (ζ) potential measurements of each effluent. The retention efficiencies of NPLs were ranked as functionalized with amidine [A-PS]+ > with sulfate [S-PS]− > with surfactant-coated amidine [SDS-A-PS]−. The reversibility of the adsorption process was revealed by introducing surfactant into the sand filter system containing adsorbed [A-PS]+ at three different initial state concentration conditions. The deposition behavior on sand grain showed that positively charged NPLs were attached to the quartz surface, and negatively charged NPLs were attached to the edge of the clay minerals, which can be caused by electrical heterogeneities. The homoaggregates made of positively charged NPLs were more compact than those made of negatively charged NPLs and surfactant-coated NPLs. An anti-correlation was revealed, suggesting a connection between the fractal dimension (Df) of NPL aggregates and retention efficiencies. Increased Df values are associated with decreased retention efficiencies.The findings underscore the crucial influence of NPL surface properties in terms of retention efficiency and reversible adsorption in the presence of surfactants in sand filtration systems.
More Papers Like This
Influence of Concentration, Surface Charge, and Natural Water Components on the Transport and Adsorption of Polystyrene Nanoplastics in Sand Columns
AI summary Read the abstract
Laboratory column experiments showed that nanoplastics made of polystyrene behave very differently in groundwater depending on their surface charge — positively charged particles were retained much more readily in sand than negatively charged ones, and the presence of natural organic matter in real lake water reduced the retention of both types. These findings matter for understanding whether nanoplastics released into the environment will travel through soil and reach drinking water sources, which depends critically on the plastic's surface chemistry.
Transport behavior of nanoplastics in activated carbon column
AI summary Read the abstract
Researchers investigated the transport and retention of nanoplastics through granular activated carbon columns used in drinking water treatment. Nanoplastics were partially retained in activated carbon but their behavior depended on particle surface charge and solution chemistry, with implications for drinking water safety.
Enhanced retention of small-sized microplastics by iron-containing sand filtration system: Effectiveness and mechanisms
AI summary Read the abstract
Researchers tested iron-loaded sand (IS) as an enhanced filtration medium for removing small microplastics from drinking water by exploiting electrostatic attraction between iron oxide coatings and negatively charged MPs. IS dramatically outperformed bare sand, reducing effluent mass percentages from ~53% to 0.79% for 200 nm MPs and from ~39% to 2.81% for 1000 nm MPs, while maintaining performance across extended filtration runs.
Different electrically charged proteins result in diverse transport behaviors of plastic particles with different surface charge in quartz sand
AI summary Read the abstract
This study found that protein coatings on microplastic surfaces significantly changed how the particles moved through quartz sand, with the effect depending on whether the proteins were positively or negatively charged. Protein coronas that form on microplastics in biological systems alter their transport behavior, which is important for understanding how plastic particles move through both environmental systems and the human body.
Mitigation of membrane particulate fouling by nano/microplastics via physical cleaning strategies
AI summary Read the abstract
This study assessed physical cleaning strategies for removing nano- and microplastic fouling from membrane surfaces used in water treatment, finding that backwashing and chemical cleaning effectiveness varied by plastic particle size and surface charge.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.