Physicochemical and pathological assessment of groundwater quality from Sargodha, Pakistan using hybrid multi-layer slow sand filter: pre and post treatment analysis

One of the main issues confronting humanity in the twenty-first century is the lack of potable water availability. Around half of the world’s consumers face drinking water scarcity. Industrially rich areas have a high population and high-water contamination risk factors. Modern technologies that are quite effective for water purification, present economical limitations that impede their usefulness in developing countries. Conventional methods involving low energy, low chemical demand, and prevention of water-borne disease are therefore significant for water purification in developing countries like Pakistan. These limitations have led to improvising the conventional method for facile water purification. Herein we report the water purification assembly based on allow sand filtration; involving the raw materials grass, clay, sand, silt, pebbles, gravel and coal/ fly ash carbon to obtain clean and quality-controlled water treatment. Ground water samples collected from various areas of Sargodha city were subjected to the developed design Hybrid Multi-Layer Slow Sand Filter (HMLSSF). Based on pre- and post-treatment water analysis, it was determined that the filtration assembly was quite effective at reducing pH, turbidity, dissolved and suspended solids, hardness, and heavy metals percent removal by 87%, 77.7%, 91.3%, 95.4%, 84.4%, and to promising levels, respectively. Moreover, 99 % biological contamination such as total coliform was also removed by this method.