We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Sustainable sand filtration strategies for microplastic removal in irrigation water
Summary
Researchers evaluated the performance of sand filtration systems with different configurations for removing microplastics from irrigation water, examining how filter parameters affect removal efficiency. The study found that optimised sand filter design can substantially reduce microplastic concentrations in agricultural irrigation water, offering a low-cost intervention to limit microplastic entry into soil-food systems.
Microplastic contamination in irrigation water poses a growing threat to agricultural ecosystems. While sand filters are widely used in irrigation systems, their efficiency and optimization parameters for microplastic removal remain insufficiently explored. This study evaluated the performance of sand filters with different media sizes (0.5-1.0, 1.0-1.5, and 1.5-2.0 mm) in removing microplastics of various morphotypes (fibers, fragments, particles) and sizes (500-5000, 200-500, 100-200 μm) from irrigation water, as well as backwash efficiency at varying flow rates (0.007-0.017 m/s) and durations (1-10 min). Results showed that the removal efficiency increased as the filter media particle size decreased, achieving removal rates of 89.9 %, 79.9 %, and 55.6 % for 0.5-1.0 mm, 1.0-1.5 mm, and 1.5-2.0 mm media, respectively. While sand filtration was highly effective for larger microplastics (81 % removal rate for 500-5000 μm), its efficiency declined significantly for smaller fractions, with only 17.3 % removal for 100-200 μm particles. Fibrous microplastics (∼85 %) were removed more effectively than particulate forms (∼30 %). Furthermore, backwashing performance improved with higher flow rates, reaching optimal efficiency at 0.017 m/s, while a 3-min duration was sufficient to maintain filter cleanliness without excessive energy consumption or media loss. This study recommends using 0.5-1.0 mm filter media combined with a backwash flow rate of 0.017 m/s and a 3-min backwash duration for optimal microplastic removal. Additionally, secondary filtration is suggested to enhance the removal of small-sized and particle-shaped microplastics. These findings provide critical operational insights for sand filtration systems, contributing to effective microplastic mitigation in agricultural irrigation and promoting sustainable land management.
Sign in to start a discussion.
More Papers Like This
Rapid Sand Filtration Technique for Remediation of Microplastics
Researchers tested rapid sand filtration as a technique for removing microplastics from water, evaluating particle removal efficiency across different plastic sizes, shapes, and filter media. The technique achieved meaningful microplastic reduction and was proposed as a practical water treatment enhancement.
Investigations and comparison of a conventional sand filter and a modified sand filter for water purification.
This study compared the performance of conventional sand filters and modified sand filters for purifying drinking water. Improving the efficiency of sand filtration is relevant to microplastics research since enhanced sand filters have shown potential for removing microplastic particles from drinking water supplies.
Microplastics Removal from a Plastic Recycling Industrial Wastewater Using Sand Filtration
Researchers demonstrated that sand filtration can effectively remove microplastics from plastic recycling facility wastewater, with laboratory-scale tests showing significant reduction in microplastic concentrations across different polymer types, sizes, and shapes.
The Effect of Filter Media Size and Loading Rate to Filter Performance of Removing Microplastics using Rapid Sand Filter
This study evaluated how filter media size and hydraulic loading rate affect rapid sand filter performance in removing microplastics from water. Smaller sand media (0.39 mm) and lower loading rates achieved greater MP removal, suggesting that optimizing these parameters can improve conventional water treatment for plastic particles.
A Novel Application of Filtration for the Collection of Microplastics in Waterways
Researchers developed a novel filtration system for collecting microplastics from waterways, demonstrating its effectiveness as a scalable and practical tool for environmental monitoring and plastic pollution assessment.