We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Biochar: from agricultural waste byproducts to novel adsorbents for ammonia and micro/nanoplastics (MNPs)
AI summary Read the abstract
Researchers tested biochar — a charcoal-like material made from agricultural waste like corn cobs — as a low-cost filter for removing microplastics and ammonia from water, finding that corn cob biochar produced at 700°C removed nearly 98% of microplastic particles. The material could be regenerated and reused for multiple cycles, and it released no harmful chemicals, making it a promising sustainable water treatment option.
Abstract Biochar, a stable carbon material derived from biomass pyrolysis, shows promise in agriculture and environmental remediation due to its high porosity, surface area, and ion exchange capacity. Its effectiveness as a filter for emerging contaminants like ammonia and micro/nanoplastics (MNPs) depends on feedstock type and pyrolysis conditions. This study first evaluated biochars produced from corn cob, cocoa husk, walnut shell, and bamboo under varying pyrolysis temperatures and residence times. Comprehensive characterization included elemental composition, porosity, surface functional groups, and polycyclic aromatic hydrocarbons (PAHs). Woody feedstocks (bamboo, walnut) yielded biochars with higher carbon content, surface area, and pore volume, while corn cob biochars provided balanced properties that warranted detailed investigation. Increasing pyrolysis temperature and time enhanced these properties but reduced oxygen-containing functional groups and variably affected PAH levels. Subsequent adsorption studies focused on corn cob biochars. Filtration tests with ammonia (1–100 ppm) and polystyrene MNPs (0.10–2.10 μm, up to 2 × 10⁷ particles/mL) showed that high-temperature samples achieved the best performance. Corn cob biochar prepared at 700 °C for 2.5 h removed 63.95% of ammonia (10 ppm, 30 g loading) and 97.99% of MNPs, with removal efficiency influenced by pyrolysis conditions, biochar load, and contaminant concentration. Importantly, no detectable release of 16 EPA priority PAHs was observed in leaching tests, confirming environmental safety. Regeneration experiments further demonstrated that corn cob biochars could be re-pyrolyzed and reused for three cycles with only modest efficiency losses, with CCB700 maintaining > 55% ammonia removal after Cycle 3. These findings highlight biochar’s potential as a sustainable, low-cost, and reusable filtration material for water treatment. Produced from agricultural residues, biochar can mitigate emerging contaminants when engineered under optimized pyrolysis conditions while minimizing environmental risks, supporting its practical application in eco-friendly wastewater treatment systems. Graphical Abstract
More Papers Like This
Biochar-based adsorption technologies for microplastic remediation in aquatic ecosystems
AI summary Read the abstract
This review examines the use of biochar, a carbon-rich material made from organic waste, as a tool for removing microplastics from water. Biochar can effectively adsorb microplastic particles due to its porous structure and surface chemistry, and it can be produced cheaply from agricultural waste. The technology shows promise as an affordable and sustainable approach to reducing microplastic contamination in waterways, though challenges remain in scaling it up for real-world water treatment.
Investigation of the Physico-chemical Properties of Biochar Obtained from Local Waste for the Removal of Pollutants, Including Microplastics, from Wastewater Treatment Plants
AI summary Read the abstract
Researchers made a charcoal-like material (biochar) from corn cob waste and tested its ability to remove pollutants, including PVC microplastics, from wastewater in lab experiments. Tests measuring its structure and chemical makeup showed the material could capture these pollutants, suggesting potential use as a low-cost treatment material for wastewater.
Advancements in Biochar as a Sustainable Adsorbent for Water Pollution Mitigation
AI summary Read the abstract
This review examines how biochar, a charcoal-like material made from plant waste, can remove over 80% of microplastics and nanoplastics from contaminated water, along with heavy metals and other pollutants. Advances in biochar production and machine learning optimization are making it a promising, sustainable tool for cleaning microplastic-polluted water before it reaches people.
Turning trash into tools: agricultural waste-derived biochars and composites for microplastic removal from wastewater
AI summary Read the abstract
This review examined the use of agricultural waste-derived biochars and biochar composites as sustainable sorbents for microplastic removal from wastewater. Researchers summarised how engineered biochars produced from crop residues and other agricultural biowaste can be functionalized to achieve efficient microplastic remediation, offering a circular economy approach to both waste valorisation and pollution control.
Interactions Between Biochar and Nano(Micro)Plastics in the Remediation of Aqueous Media
AI summary Read the abstract
This review examines how biochar, a charcoal-like material made from organic waste, can be used to remove micro and nanoplastics from contaminated water. Biochar is an affordable and sustainable option that absorbs plastic particles, though the technology is still in early stages. Better water purification methods like this could help reduce the amount of microplastics that end up in drinking water and the human body.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.