0
Article Tier 2 Nanoplastics Remediation Sign in to save

Removal of polypropylene nanoplastics from aqueous solution by biochar derived from Date palm fibers: Kinetics and isotherms studies

Analytical Methods in Environmental Chemistry Journal 2024 1 citation

AI summary Read the abstract

Researchers examined activated carbon derived from date palm fiber powder as an adsorbent for removing polypropylene nanoplastics from aqueous solutions, characterizing the material via XRD, FT-IR, and SEM and optimizing contact time, nanoplastic concentration, and adsorbent dosage while determining equilibrium and kinetic adsorption parameters.

Polymers

In this work, activated carbon (AC) derived from powder of date palm fibers (DPF) was examined as an adsorbent for removing polypropylene nanoplastics (PPNPs) from aqueous solutions. The adsorbent was characterized using XRD, FT-IR, and SEM analyses. Affecting parameters on removal efficiency in a batch reactor, such as contact time, concentration of PPNPs and amount of adsorbent, were evaluated and optimized. Equilibrium and kinetic studies are performed to understand adsorption mechanisms. In the batch system, 30 mL of polypropylene suspension (5-40 mgL-1) was added to Erlenmeyer flask. First, different amounts of AC adsorbent were added to the container, then microplastic was added to the reactor. The mixture was shaken on a shaker for four hours at 25oC. The flask was removed from the shaker, the concentration of PPNPs in the supernatant was measured, and a settling time of 30 min was obtained. A control suspension system without PPNPs nanoplastics (with biochar and without PPNPs) was also performed to evaluate carbon particle interference by turbidity measurements. Our results showed that kinetic data were consistent with the pseudo-second-order kinetic model. Equilibrium data for the adsorption of PPNPs on biochar represented by the Langmuir isotherm model is better than the Freundlich isotherm model.

More Papers Like This

Article Tier 2

Enhanced removal of PVC nanoplastics from water using microwave-activated palm frond biochar

AI summary Read the abstract

Researchers developed a low-cost sorbent from palm-frond agricultural waste by microwave activation and NaOH treatment, and further produced a magnetically retrievable composite for enhanced removal of PVC nanoplastics from water. The modified palm-frond biochar demonstrated substantially improved nanoplastic adsorption capacity compared to unmodified biochar, offering a sustainable remediation material derived from agricultural waste.

Article Tier 2

Biochar-facilitated remediation of nanoplastic contaminated water: Effect of pyrolysis temperature induced surface modifications

AI summary Read the abstract

Researchers synthesized sugarcane bagasse biochar at three pyrolysis temperatures and found that biochar produced at 750°C removed over 99% of nanoplastics from water within 5 minutes, with monolayer sorption kinetics and a capacity of 44.9 mg/g, offering a rapid and efficient agricultural-waste-derived remediation approach.

Article Tier 2

Study on Simulated Adsorption of Two Kinds of Biochar on Different Degradable Microplastics

AI summary Read the abstract

Researchers tested two types of biochar for their ability to adsorb both conventional and biodegradable microplastics, finding that biochar may offer a sustainable, low-cost method for capturing these particles from contaminated environments.

Article Tier 2

Current progress in sorptive eradication of microplastics from aqueous media: a review

AI summary Read the abstract

This review summarized sources of microplastics and their health effects, and evaluated various sorbent materials—including biochar, activated carbon, and nanomaterials—used to remove MPs from water under different pH, temperature, and concentration conditions.

Systematic Review Tier 1

Biochar and activated carbon for micro‐ and nanoplastic removal in aqueous systems: a systematic review on mechanisms, influencing factors, and performance

AI summary Read the abstract

This review combined 12 lab studies on using charcoal-like materials, biochar and activated carbon, to remove tiny plastic particles from water. Versions treated with iron compounds removed over 90% of particles in lab tests, but most experiments used artificial water and clean plastic samples, not real-world conditions.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper