0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Remediation Sign in to save

Sequestration of chromium by Ananas comosus extract–coated nanotubes: synthesis, characterization, optimization, thermodynamics, kinetics, and antioxidant activities

Biomass Conversion and Biorefinery 2024 2 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 40 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
James F. Amaku, Raymond Taziwa

Summary

This paper is not about microplastics — it describes the synthesis of a pineapple extract-coated carbon nanotube adsorbent and tests its efficiency for removing hexavalent chromium from simulated wastewater.

Study Type Environmental

Abstract Herein, a superior adsorbent was fabricated via immobilizing Ananas comosus juice extract on nanotubes (MWPJ) for the removal of chromium (VI) from simulated wastewater. The batch adsorption technique was used to establish the influence of solution pH, adsorbent dosage, solution temperature, initial Cr(VI) concentration, and contact time on the adsorption of chromium (VI). To comprehend the surface properties and to confirm chromium (VI) adsorption onto MWPJ and MWCNTs, TGA, SEM, and FTIR analyses were performed for MWPJ and MWCNTs before and after the adsorption process. These spectroscopic techniques revealed the temperature and surface characteristics responsible for the effectiveness of MWPJ. MWPJ and MWCNTs demonstrated optimum removal potential at solution pH 2, 0.05 g adsorbent dosage, and 180 min contact time. The MWPJ and MWCNTs had a maximum adsorption potential of 44.87 and 33.38 mg g −1 at 25 °C respectively. The reaction rate kinetics data for MWPJ and MWCNTs fitted well with Elovich and the pseudo-first-order kinetic model, respectively, while the saturated equilibrium data were best described by Freundlich isotherm. The thermodynamics analysis revealed that the uptake of Cr(VI) onto MWPJ and MWCNTs was a spontaneous and exothermic process. After five adsorption–desorption cycles of MWPJ, about 80% removal efficiency of Cr(VI) ions was sustained. Hence, MWPJ has demonstrated a superior capacity for practical applications in environmental remediation practice.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Nitric Acid-Treated Blue Coke-Based Activated Carbon’s Structural Characteristics and Its Application in Hexavalent Chromium-Containing Wastewater Treatment

This study developed a nitric acid-modified activated carbon from blue coke powder for removing hexavalent chromium from wastewater. While focused on heavy metal removal, the research is relevant to broader water treatment challenges where microplastics and chemical pollutants co-occur in industrial effluents.

Article Tier 2

A Review on Cassava Residues as Adsorbents for Removal of Organic and Inorganic Contaminants in Water and Wastewater

This paper is not relevant to microplastics research — it reviews cassava agricultural residues as adsorbents for removing heavy metals and organic pollutants from water, covering adsorption kinetics and thermodynamics.

Article Tier 2

Microplastic removal from treated wastewater utilizing ecofriendly biowaste adsorbent

Finding low-cost, sustainable ways to remove microplastics from treated wastewater before it is discharged is a major challenge. This study showed that a simple adsorbent made from banana peels—an abundant agricultural waste—could remove more than 99% of microplastics from both synthetic and real treated wastewater under optimized conditions (25 minutes contact time, pH 4, 300 mg/L dose). The result demonstrates that cheap biowaste materials could offer a practical last-stage treatment option for wastewater plants, particularly in lower-income settings where expensive filtration infrastructure is unavailable.

Article Tier 2

Optimization of Electrode Materials Using Nanocarboxylic Polystyrene Promotes Accumulation for Chromium in Zea mays from Water and Soil Contamination

Researchers used nanocarboxylic polystyrene nanoplastics to optimize electrode materials for chromium energy storage applications, taking advantage of nanoplastic surface chemistry to improve electrochemical performance. The study simultaneously developed a method for concentrating nanoplastics from water using electrochemical accumulation, addressing both energy storage and environmental remediation goals.

Article Tier 2

Adsorption of Co2+ and Cr3+ in Industrial Wastewater by Magnesium Silicate Nanomaterials

This paper is not about microplastics. It describes the development of magnesium silicate nanomaterials for removing cobalt and chromium heavy metals from industrial wastewater. While water treatment technology is broadly relevant to environmental health, this study focuses entirely on metal ion adsorption chemistry with no connection to microplastic contamination.

Share this paper