We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Efficacy of bacterial cellulose hydrogel in microfiber removal from contaminated waters: A sustainable approach to wastewater treatment
AI summary Read the abstract
Researchers developed a bacterial cellulose hydrogel made from unused cellulose remnants and tested it as an eco-friendly filter for removing microfibers from contaminated water. The hydrogel achieved an average removal rate of nearly 94 percent and retained the captured fibers well, releasing only about 8 percent after washing. The study presents this bio-based approach as a sustainable and effective alternative for tackling microfiber pollution in wastewater.
Microfibers (MFs), the dominant form of microplastics in ecosystems, pose a significant environmental risk due to the inadequacy of existing wastewater treatments to remove them. Recognising the need to develop sustainable solutions to tackle this environmental challenge, this research aimed to find an eco-friendly solution to the pervasive problem of MFs contaminating water bodies. Unused remnants of bacterial cellulose (BC) were ground to form a hydrogel-form of bacterial cellulose (BCH) and used as a potential bioflocculant for polyacrylonitrile MFs. The flocculation efficiency was evaluated across various operational and environmental factors, employing response surface methodology computational modelling to elucidate and model their impact on the process. The results revealed that the BCH:MFs ratio and mixing intensity were key factors in flocculation efficiency, with BCH resilient across a range of environmental conditions, achieving a 93.6 % average removal rate. The BCH's strong retention of MFs released only 8.3 % of the MFs, after a 24-hour wash, and the flocculation tests in contaminated wastewater and chlorinated water yielded 89.3 % and 86.1 % efficiency, respectively. Therefore, BCH presents a viable, sustainable, and effective approach for removing MFs from MFs-contaminated water, exhibiting exceptional flocculation performance and adaptability. This pioneer study using BCH as a bioflocculant for MFs removal sets a new standard in sustainable wastewater treatment, catalysing research on fibrous pollutant mitigation for environmental protection.
More Papers Like This
Sustainable approach for microfibres removal: bacterial cellulose residues
AI summary Read the abstract
Bacterial cellulose residues — a byproduct of industrial fermentation — were tested as a low-cost material for capturing synthetic microfibers from wastewater. The material showed promising ability to bind and remove fibers, which are the most common microplastic type in domestic wastewater. Using this sustainable byproduct for microfiber removal could offer an inexpensive way to reduce microplastic emissions from laundry and textile industries.
Bacterial cellulose biopolymers: The sustainable solution to water-polluting microplastics
AI summary Read the abstract
Researchers developed bacterial cellulose (BC) biopolymer filters as a sustainable alternative to petroleum-based polymer filters used in wastewater treatment plant microplastic removal. BC filters showed high MP capture efficiency and are biodegradable, addressing both microplastic pollution and the environmental costs of conventional synthetic filter maintenance.
New strategy for microplastic bioremediation: cellulose biopolymer-based hydrogel
AI summary Read the abstract
Researchers evaluated bacterial cellulose hydrogel as a biodegradable flocculant to remove microplastics from contaminated water, finding that it effectively aggregated and settled plastic particles under optimized conditions. This plant- and bacteria-derived natural material offers a promising eco-friendly approach for treating microplastic-contaminated wastewater without adding chemical pollutants.
Advancing bacterial cellulose biopolymers & hydrogels to remediate microplastic pollution
AI summary Read the abstract
Researchers developed bacterial cellulose biopolymers and hydrogels as biodegradable alternatives to fossil-fuel-based filters for removing microplastics from wastewater, optimizing operational parameters using response surface methodology. Results showed removal efficiencies of up to 99% for concentrated MP suspensions, with flow cytometry, electron microscopy, and ATR-FTIR confirming the flocculation mechanism and the potential for large-scale industrial application.
Solving urban water microplastics with bacterial cellulose hydrogels: Leveraging predictive computational models
AI summary Read the abstract
Researchers developed bacterial cellulose hydrogels from membrane remnants as sustainable bioflocculants for removing microplastics from urban water, using computational models to predict and optimize removal efficiency under varying conditions.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.