0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Marine & Wildlife Remediation Sign in to save

Effect of Copper Antifouling Paint on Marine Degradation of Polypropylene: Uneven Distribution of Microdebris between Nagasaki Port and Goto Island, Japan

Molecules 2024 Score: 35 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Hisayuki Nakatani, K Yamashiro, Taishi Uchiyama, Suguru Motokucho, Anh Dao, Hee‐Jin Kim, Mitsuharu Yagi, Yusaku Kyozuka

Summary

Researchers characterised marine microdebris including microplastics and copper-based paint particles collected at five stations between Nagasaki Port and Goto Island, Japan, then prepared polypropylene samples containing cuprous oxide and studied their accelerated marine degradation using sulfate ion radical initiation to clarify interactions between antifouling paint and microplastic breakdown.

Polymers
Study Type Environmental

Microplastics (MP) encompass not only plastic products but also paint particles. Marine microdebris, including MP, was retrieved from five sampling stations spanning Nagasaki-Goto island and was classified into six types, primarily consisting of MP (A), Si-based (B), and Cu-based (C) paint particles. Type-A particles, i.e., MP, were exceedingly small, with 74% of them having a long diameter of 25 µm or less. The vertical distribution of type C, containing cuprous oxide, exhibited no depth dependence, with its dominant size being less than 7 μm. It was considered that the presence of type C was associated with a natural phenomenon of MP loss. To clarify this, polypropylene (PP) samples containing cuprous oxide were prepared, and their accelerated degradation behavior was studied using a novel enhanced degradation method employing a sulfate ion radical as an initiator. Infrared spectroscopy revealed the formation of a copper soap compound in seawater. Scanning electron microscopy/energy-dispersive X-ray spectroscopy analysis indicated that the chemical reactions between Cl- and cuprous oxide produced Cu+ ions. The acceleration of degradation induced by the copper soap formed was studied through the changes in the number of PP chain scissions, revealing that the presence of type-C accelerated MP degradation.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Verification of the existence of copper-based antifouling paint particles in the sea and their implications for marine microplastic degradation

Researchers collected marine debris near Nagasaki, Japan, and found copper-based antifouling paint particles alongside conventional microplastics at several sampling stations. These copper-based particles differ in chemical composition from typical plastic debris and may influence surrounding microplastic degradation patterns. The co-occurrence raises new questions about combined effects of paint particles and microplastics in marine environments.

Article Tier 2

Verification of the existence of copper-based antifouling paint particles in the sea and their implications for marine microplastic degradation

Researchers collected marine debris samples near Nagasaki, Japan, and found that copper-based antifouling paint particles are widespread in the sea alongside conventional microplastics. The copper-based particles showed no depth-dependent distribution, unlike typical microplastics. Their presence may interact with or influence the degradation of surrounding plastic debris.

Article Tier 2

Co-occurrence of microplastics and microparticles containing Cu and Zn and other heavy metals in sea-surface microlayer in Osaka Bay, Japan

Researchers analyzed tiny particles floating on the sea surface in Osaka Bay, Japan, and found microplastics containing heavy metals like copper and zinc from ship antifouling paints. Most of these metal-laden particles were made of acrylic resins commonly used in marine coatings, carrying copper concentrations up to 54,000 mg/kg. The study reveals that antifouling paint fragments are a significant and underrecognized source of toxic metal-containing microplastics in coastal waters.

Article Tier 2

Characterization of microplastics from antifouling coatings released under controlled conditions with an automated SEM-EDX particle analysis method

Researchers demonstrated that antifouling coatings on boat hulls release microplastic particles into seawater during normal sailing conditions, with most particles between 1 and 5 micrometers in size. These particles contain both plastic binder material and toxic metals like copper and zinc used as biocides. This study reveals an often-overlooked source of microplastic pollution in the ocean, where the released particles carry both plastic and heavy metal contamination into marine ecosystems.

Article Tier 2

Increased Cu(II) Adsorption Onto UV-Aged Polyethylene, Polypropylene, and Polyethylene Terephthalate Microplastic Particles in Seawater

Researchers found that UV aging significantly increased copper(II) adsorption onto polyethylene, polypropylene, and polyethylene terephthalate microplastics in seawater by up to 2.92 times after 12 months, with oxidation-induced surface changes and smaller particle sizes amplifying this effect for PP and PET.

Share this paper