We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Standard Test Method for Identification of Polymer Type and Quantity of Microplastic Particles and Fibers in Waters with High to Low Suspended Solids Using Pyrolysis-Gas Chromatography/Mass Spectrometry
Summary
Researchers developed and standardized a pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) test method for identifying and quantifying microplastic polymer types and quantities across waters with varying suspended solids levels. The standard addresses the growing recognition of polymeric organic compounds as contaminants in drinking water, wastewater, surface water, groundwater, and marine waters.
Significance and Use 5.1 Preliminary studies have identified polymeric organic compounds as contaminants in treated drinking water, wastewater, surface water, ground water, and marine waters. These polymers may be harmful to the environment and adversely
Sign in to start a discussion.
More Papers Like This
Standard Test Method for Identification of Polymer Type and Quantity of Microplastic Particles and Fibers in Waters with High to Low Suspended Solids Using Pyrolysis-Gas Chromatography/Mass Spectrometry
This paper describes the development of an ASTM standard test method using pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS) to identify and quantify specific polymer types in microplastic particles and fibers across a wide range of water types, from drinking water to marine water. Standardizing how microplastics are measured is a critical step toward producing comparable data across studies and enabling consistent regulatory monitoring. A validated, accepted method like this helps close the large gaps in microplastic data that currently hinder risk assessment and policy-making.
Identification of Microplastics in Drinking Water Using Pyrolysis-GC/MS
Researchers used pyrolysis-GC/MS to identify and quantify microplastics by polymer mass (rather than particle count) in drinking water samples. The method detected multiple polymer types and provided mass-based metrics that are more toxicologically relevant than particle counts commonly reported in water quality studies.
Routine method for the analysis of microplastics in natural and drinking water by pyrolysis coupled to gas chromatography-mass spectrometry
Researchers developed a standardized method to measure microplastics in drinking water using a technique called pyrolysis gas chromatography-mass spectrometry. They tested the method on river water, reclaimed water, and tap water in Barcelona, finding microplastic concentrations ranging from 11 to 77 micrograms per liter. Reliable detection methods like this are essential for understanding how much microplastic people are actually consuming through their drinking water.
Optimization, performance, and application of a pyrolysis-GC/MS method for the identification of microplastics
Researchers optimized a pyrolysis-GC/MS method for identifying and quantifying microplastics in environmental samples, improving the reliability of polymer identification especially for small particles that are difficult to classify visually. The improved method is particularly valuable for analyzing the smallest microplastic size fractions that dominate by number in marine environments.
Analysis of Microplastics in Environmental Waters by Pyrolysis-GC/MS
This chapter reviewed pyrolysis-GC/MS as an analytical method for detecting and quantifying microplastics in environmental water samples including wastewater, rivers, and seawater. Unlike size-limited optical methods, Py-GC/MS can analyze particles of any size and directly identify polymer types, making it a promising high-throughput tool.