We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in gully pot sediment in urban areas: Presence, quantities and characteristics
Summary
Researchers analyzed sediment from 29 urban gully pots — the roadside drains that funnel stormwater into sewer pipes — and found concentrations of up to 10,600 microplastic particles per 100g of sediment, with tire wear particles making up roughly a third. The study shows gully pots act as temporary traps for microplastics before they flush into waterways, and that maintaining and cleaning them could reduce the flow of microplastics into rivers and the ocean. This is a practical, infrastructure-based intervention point for cutting urban microplastic pollution.
Stormwater is widely recognized as a pathway for transporting pollutants, including microplastics, from sources in urban environments to receiving waters. Gully pots are often where urban runoff drains into the piped network; they typically include a trap where sediments accumulate. The aim of this work was to contribute to a better understanding of the fate of microplastics as they enter into the urban drainage system, and the role of gully pots in trapping microplastics. Sediment samples collected from 29 gully pots were analysed for non-carbon-black and carbon-black (e.g. tire wear particles) microplastics larger than 40 μm using μ-FTIR and ATR-FTIR, respectively. Commonly found polymers in descending order were PP > EPDM > EVA > PS > SBR, PP was most common both by mass and by number of microplastics. The total concentration of carbon black and non-carbon black microplastics ranged from 709 to 10 600 items/100 g dry matter (DM), (median: 2960 items/100 g). Estimated mass of non-carbon black microplastics ranged from 0.19 to 490 mg/100 g, (median: 3.66 mg/100 g). In total 21 different types of microplastics were detected, the majority of these (13) were carbon black and eight non-carbon black polymer types. By number and the carbon black particles accounted for up to 68% of the microplastics (average 30%), this stress the importance of using analytical methods enabling the detection of both carbon-black and non-carbon black microplastics. Furthermore, the results indicate that gully pots can act as temporary sinks for microplastics, mainly for microplastics larger than 125 μm. The amount of microplastics found in gully pots, together with the very large number of gully pots sited in urban areas, indicates that gully pots can potentially trap large amounts of microplastics, and thus if gully pots are fitted and maintained properly they could significantly contribute to reducing the amount of microplastics reaching receiving waters.
Sign in to start a discussion.
More Papers Like This
Tire wear particles concentrations in gully pot sediments
Researchers measured tire wear particle (TWP) concentrations in gully pot sediments, developing analytical methods to quantify this major microplastic source in road runoff as it enters urban drainage systems before reaching the broader environment.
Microplastics and Tire Wear Particles in Urban Stormwater: Abundance, Characteristics, and Potential Mitigation Strategies
Researchers measured microplastic concentrations in urban stormwater and found levels ranging from about 4 to 59 particles per liter, with tire wear particles making up roughly 95% of all particles detected. Microlitter capture devices reduced microplastic loads by 35 to 88%, and constructed wetlands provided additional removal. The study suggests that targeted stormwater treatment infrastructure could meaningfully reduce the flow of microplastics into rivers and coastal waters.
Relevance of tyre wear particles to the total content of microplastics transported by runoff in a high-imperviousness and intense vehicle traffic urban area.
Researchers characterized microplastics and tire wear particles (TWPs) transported by urban stormwater runoff in a highly impervious catchment, finding that TWPs made up a substantial fraction of the total microplastic load in sediments of a stormwater detention reservoir. The study underscores the contribution of road traffic to microplastic pollution entering waterways.
Microplastic pollution in sediments of urban rainwater drainage system
Researchers found microplastics in all sediment samples from a university campus rainwater drainage system, with abundances ranging from 80 to 2,610 particles/kg and the highest concentrations in student living areas, suggesting that land use patterns and management practices influence microplastic accumulation in urban stormwater infrastructure.
Microplastics and tyre wear particles in urban runoff from different urban surfaces
Researchers measured microplastics and tire wear particles in stormwater runoff from roads, parking lots, and rooftops in Sweden. They found that road runoff carried the highest concentrations by far, with large variations between rainfall events. The findings highlight urban roads as a major source of microplastic pollution entering nearby waterways through stormwater.