We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A method for the extraction of microplastics from solid biowastes including biosolids, compost, and soil for analysis by µ-FTIR
Summary
Researchers developed and validated a method for extracting microplastics from solid organic materials including biosolids, compost, and soil for analysis by micro-FTIR spectroscopy. The approach combines wet peroxide oxidation with sequential density separations to isolate plastic particles from complex organic matrices. The method provides a reliable protocol for researchers studying how microplastics move through and accumulate in agricultural and waste management systems.
Few methods exist detailing the extraction of microplastics from organic matrices. A validated method for the successful extraction of microplastics from solid biowastes including biosolids, compost, and soil for spectroscopic analysis by micro-Fourier transform infrared spectroscopy (µ-FTIR) was developed. Solid dry biowastes were first digested with a wet peroxide oxidation (WPO) with iron (II) solution and 30% hydrogen peroxide followed by sequential density separations with ultra-pure water and 1.8 g cm NaI in an optimised sediment-microplastic isolation (SMI) unit. The average recoveries for spiked microplastics were 92, 95 and 98% for bagged compost, biosolids, and soil, respectively. This method ensures a high microplastic recovery by first chemically disintegrating biowaste aggregates without employing destructive methods like milling and allows for successful density separations where the settled fraction is isolated off from the supernatant, allowing thorough rinsing of the equipment and thus a greater transferal of particles into the vacuum filtering device. Minimal processing steps reduce the instance of introducing contamination and particle loss.•Digestion as a first step to disintegrate aggregates to release entrapped microplastics•Density separation with SMI unit with the method adapted for biowastes•Minimal steps to reduce contamination and particle loss.
Sign in to start a discussion.
More Papers Like This
Novel integrated workflow for microplastics extraction, quantification, and characterization in organic fertilizing residuals using micro-Fourier transform infrared spectroscopy (μ-FTIR)
Researchers developed a reliable method for extracting and measuring microplastics in organic fertilizers like compost and biosolids that are spread on farm fields. The technique successfully detected 19 different plastic types down to very small sizes in fertilizer samples from Quebec, Canada. This is important because organic fertilizers are a major but often unmeasured source of microplastics entering agricultural soil, which can then reach crops and the food supply.
Chemical characterization of microplastics from biosolids: a comparison of FTIR and O-PTIR microspectroscopy
Researchers compared conventional micro-FTIR and novel Optical Photothermal Infrared spectroscopy for chemical identification of microplastics in three biosolid sample types — wastewater treatment sludge, compost, and biofertilizer — after a multi-step cleanup procedure involving Fenton oxidation, cellulase enzyme degradation, density separation, and filtration. They identified six polymer types including PE, PS, PVA, PET, PVC, and PMMA, finding that O-PTIR outperformed micro-FTIR for smaller particles due to its 500 nm spatial resolution, while spectra from both methods were closely matched.
Optimized microplastic analysis based on size fractionation, density separation and μ-FTIR
Researchers optimized a multi-step method for extracting and identifying microplastics from soil and sediment, combining grain size separation, density flotation, and infrared microscopy. The validated method achieved high recovery rates for eight common plastic polymers, contributing to more reliable monitoring of soil microplastic contamination.
Optimising sample preparation for FTIR-based microplastic analysis in wastewater and sludge samples: multiple digestions
Researchers optimized sample digestion protocols for FTIR-based microplastic analysis in wastewater and sludge, finding that multiple sequential digestion steps improve removal of organic matter while minimizing polymer degradation.
Analysis of microplastics in soil samples by using a thermal decomposition method
Researchers tested thermal decomposition as a method for extracting and identifying microplastics in soil samples, a particularly challenging matrix because organic matter interferes with optical detection methods. The approach showed promise for detecting and quantifying plastic content in complex soil environments.