We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Properties and Possibilities of Using Biochar Composites Made on the Basis of Biomass and Waste Residues Ferryferrohydrosol Sorbent
Summary
Not relevant to microplastics — this is a materials science study on iron-enriched biochar composites made from waste biomass, evaluated for their ability to remove dyes, pharmaceuticals, and heavy metals from water via adsorption.
Biochar enriched with metals has an increased potential for sorption of organic and inorganic pollutants. The aim of the research was to identify the possibility of using biochar composites produced on the basis of waste plant biomass and waste FFH (ferryferrohydrosol) containing iron atoms, after CO2 capture. The composites were produced in a one-stage or two-stage pyrolysis process. Their selected properties were determined as follows: pH, ash content, C, H, N, O, specific surface area, microstructure and the presence of surface functional groups. The produced biochar and composites had different properties resulting from the production method and the additive used. The results of experiments on the removal of methylene blue (MB) from solutions allowed us to rank the adsorbents used according to the maximum dye removal value achieved as follows: BC1 (94.99%), B (84.61%), BC2 (84.09%), BC3 (83.23%) and BC4 (83.23%). In terms of maximum amoxicillin removal efficiency, the ranking is as follows: BC1 (55.49%), BC3 (23.51%), BC2 (18.13%), B (13.50%) and BC4 (5.98%). The maximum efficiency of diclofenac removal was demonstrated by adsorbents BC1 (98.71), BC3 (87.08%), BC4 (74.20%), B (36.70%) and BC2 (30.40%). The most effective removal of metals Zn, Pb and Cd from the solution was demonstrated by BC1 and BC3 composites. The final concentration of the tested metals after sorption using these composites was less than 1% of the initial concentration. The highest increase in biomass on prepared substrates was recorded for the BC5 composite. It was higher by 90% and 54% (for doses of 30 g and 15 g, respectively) in relation to the biomass growth in the soil without additives. The BC1 composite can be used in pollutant sorption processes. However, BC5 has great potential as a soil additive in crop yield and plant growth.
Sign in to start a discussion.
More Papers Like This
Microplastic Removal from Wastewater Using Biochar Based Composite
This book chapter describes how biochar-based composites can be used as adsorbents for removing microplastics from wastewater, reviewing the mechanisms of plastic particle capture and the performance of biochar materials compared to conventional treatment approaches.
The Use of Biochar for Removal of Emerging Contaminants in Contaminated Water
This literature review examined 15 studies on biochar for removing emerging contaminants from water and effluents, finding that biochar made from waste raw materials is a low-cost, efficient, and scalable adsorbent for various pollutants. The review is relevant to microplastic research as biochar has potential as a treatment material for water contaminated with emerging contaminants co-occurring with microplastics.
Biochar-based adsorption technologies for microplastic remediation in aquatic ecosystems
This review examines the use of biochar, a carbon-rich material made from organic waste, as a tool for removing microplastics from water. Biochar can effectively adsorb microplastic particles due to its porous structure and surface chemistry, and it can be produced cheaply from agricultural waste. The technology shows promise as an affordable and sustainable approach to reducing microplastic contamination in waterways, though challenges remain in scaling it up for real-world water treatment.
Synthesis Methods, Properties, and Modifications of Biochar-Based Materials for Wastewater Treatment: A Review
This review covers biochar-based materials made from agricultural waste and their use in treating contaminated water, including their ability to remove heavy metals, organic pollutants, and emerging contaminants. While not specifically about microplastics, biochar's adsorption properties make it a promising tool for removing microplastics and the chemicals they carry from water. Low-cost water treatment materials like biochar could help reduce human exposure to microplastics, especially in communities that lack advanced treatment infrastructure.
Trends in the applications of biochar for the abatement of microplastics in water
This review examines how biochar can be used to remove microplastics and nanoplastics from water, summarizing recent advances in biochar modification strategies that improve adsorption capacity and minimize secondary pollution risks.