We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Method development for the analysis of coating/paint particles from offshore wind farms in sediment samples
AI summary Read the abstract
Researchers developed analytical methods to detect and characterise coating and paint particles released from offshore wind farm structures in marine sediment samples, addressing a largely unmonitored source of chemical emissions. The study, part of the EU Interreg Anemoi project, investigated particulate release from corrosion protection coatings, paints, and rotor blade leading-edge erosion directly entering the marine environment.
Even though offshore energy production has risen sharply in the last decades, not all possible effects of offshore wind farms (OWFs) are monitored yet and potential risks resulting from chemical emissions of these structures are still largely unknown. Within the EU Interreg project Anemoi, chemical emissions from OWFs are investigated. Sources of chemical emissions are, amongst others, the particulate release of corrosion protection coatings and paints, as well as leading edge erosion of rotor blades. In both cases, particles are directly introduced into the marine environment. Even though paint particles are introduced into the marine environment not only by OWFs, but a wide range of sources, at the current time only a small number of studies have investigated these particles in marine samples. This is related to inconsistencies regarding their classification as microplastics, and to methodical challenges which hamper the analysis of these particles in environmental samples. Before beginning to analyse coating particles in sediment collected in and near OWFs, we first tested multiple methodical approaches with respect to their suitability to separate these particles from the sample matrix. Spiked samples were prepared comprising marine sediment (sandy or silty) and coating particles. Six coatings commonly used on offshore wind turbines (four epoxy-based and two polyurethane-based) from two manufacturers were tested. The sample processing included density separation and digestion steps as well as the identification of particles performed visually, by FTIR, and Pyrolysis GC/MS. Two different salt solutions, differing in their density, were applied for density separation of coating and sediment particles and recovery rates were calculated. In parallel, the chemical resistance of coating particles towards various digestion protocols was tested. It became clear that the diverging physical (e.g., density, brittleness) and chemical properties of these type of particles compared to common plastics require attention at all stages of sample processing. Also see: https://micro2024.sciencesconf.org/558785/document
More Papers Like This
Method development for the analysis of coating/paint particles from offshore wind farms in sediment samples
AI summary Read the abstract
Researchers developed analytical methods for detecting and characterising coating and paint particles released from offshore wind farm (OWF) structures — including corrosion protection coatings and rotor blade leading edge erosion — in marine sediment samples. The study addressed methodological challenges arising from inconsistent classification of paint particles as microplastics and the lack of standardised analysis protocols for this underinvestigated source.
Environmental impact of microplastic shedding from offshore wind turbine coatings
AI summary Read the abstract
Researchers investigated the environmental impact of microplastic shedding from protective coatings applied to offshore wind turbine structures, as the expansion of offshore wind energy raises concerns about plastic pollution from installation and operation. Different coating types were shown to vary in their microplastic shedding potential under marine conditions.
Critical review of analytical methods for antifouling paint particles in marine systems
AI summary Read the abstract
This review critically examines the sources, sampling strategies, and analytical methods used to detect and quantify antifouling paint particles in marine environments. Researchers found that while recent studies have begun characterizing these particles, the methods used lack standardization and consistency. The study calls for the development of harmonized protocols to better assess the environmental prevalence and toxicity of paint-derived microparticles in the ocean.
Environmental impact of microplastic shedding from offshore wind turbine coatings
AI summary Read the abstract
The PREMISE project investigated microplastic shedding from protective coatings used on offshore wind turbine structures, examining how different coating types vary in their microplastic emission potential under real marine conditions. The study aims to develop best practices for coating selection that minimize plastic particle release into the marine environment during wind energy operations.
Analysis of epoxy resin anti-corrosion coatings with (reactive) pyrolysis gas chromatography/mass spectrometry
AI summary Read the abstract
Researchers developed a new method using reactive pyrolysis gas chromatography to analyze the complex chemical composition of anti-corrosion marine coatings, which are estimated to be a major source of microplastics in the ocean. Marine paint particles are difficult to study because they contain many different polymers and additives mixed together. The new analytical approach provides better chemical characterization of paint-derived microplastics, an important step toward understanding this overlooked pollution source.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.