We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A metal-insulator-metal waveguide-based plasmonic refractive index sensor for the detection of nanoplastics in water
AI summary Read the abstract
Researchers designed a light-based sensor using a metal-insulator-metal waveguide and square-ring resonator that can detect nanoplastics in water at extremely low concentrations by measuring tiny changes in how light bends through the sample. The optimized sensor achieved a sensitivity of 2700 nm/RIU, making it a promising tool for detecting minute levels of plastic contamination in water.
A metal-insulator-metal waveguide-based square-ring resonator plasmonic refractive index sensor is designed and optimized for achieving high sensitivity. The sensitivity of the sensor critically depends on the physical dimension and the geometrical parameters of the resonator. Systematic studies on varying geometrical parameters of the resonator reveal that the sensitivity increases with the number of concentric square-rings. Moreover, the full-width-half-maxima of the resonance line is found to increase with the number of square rings. Importantly, variations in the coupling length affect the transmitted intensity as well as the full-width-half-maxima of the resonance spectra in a characteristic fashion. An initial exploration of the optimized sensor for nanoplastic detection for a range of volume fractions 0.15625-0.625% shows a systematic linear increase in the resonance wavelength with changing refractive index of the surrounding medium. This offers the possibility of ultrasensitive detection of extremely small change ( ∼ 0.00025 ) in the local refractive index as the signature of a minute level of plastic contamination. This was achieved by using an optimized sensor design with a sensitivity of 2700 nm/RIU and a full-width-half-maxima of 333 nm. Results presented in the paper demonstrate the considerable promise of the proposed plasmonic refractive index sensor towards nanoplastic detection.
More Papers Like This
Design Optimisation of Optical Planar Waveguide Sensor for Microplastics Detection in Water
AI summary Read the abstract
Researchers simulated an optical planar waveguide sensor design for microplastic detection in water using the Wave Optics Module in COMSOL Multiphysics, optimising cladding thickness (0-5 µm) and evaluating sensor performance across the refractive index range (1.480-1.500 RIU) corresponding to microplastic materials.
On optical sensing of surface roughness of flat and curved microplastics in water
AI summary Read the abstract
Researchers developed and tested an optical sensor prototype capable of detecting microplastic particles of different shapes and surface textures in water by measuring light reflection patterns. The sensor offers a potential path to faster, in-situ microplastic detection without requiring chemical analysis.
On-Chip Volume Refractometry and Optical Binding of Nanoplastics Colloids in a Stable Optofluidic Fabry–Pérot Microresonator
AI summary Read the abstract
Researchers developed a miniaturized on-chip sensor using a Fabry-Perot microresonator to detect and analyze nanoplastic particles in liquid samples. The device uses changes in light refraction to measure the concentration of nanoplastic colloids and can even optically trap particles for closer study. This approach offers a potential lab-on-a-chip tool for rapid, sensitive detection of nanoplastics in environmental samples.
Fiber Laser-Backscattered Optofluidic Sensor for Ultrasensitive and Wide-Range Nanoplastic Quantification
AI summary Read the abstract
Scientists have developed a new laser-based sensor that can detect and measure tiny plastic particles called nanoplastics in water, even at extremely low concentrations. This matters because nanoplastics are too small to see and hard to detect with current tools, but they may end up in our drinking water and food—this device could enable faster, on-site testing to monitor contamination levels. While the tool shows promise in real water samples, more research is needed to understand what levels of nanoplastic exposure actually mean for human health.
Droplet-based Opto-microfluidic Device for Microplastic Sensing in Aqueous Solutions
AI summary Read the abstract
Researchers developed a microfluidic device using light to detect plastic microspheres in water droplets, offering a new tool for identifying microplastic contamination in aquatic environments.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.