We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Efficient removal of nanoplastics by iron-modified biochar: Understanding the removal mechanisms
AI summary Read the abstract
Researchers created iron-modified biochar from green algae waste to remove nanoplastics from water. The modified biochar achieved a removal capacity three times higher than unmodified biochar, reaching up to 1,626 milligrams per gram, through a two-phase process of adsorption followed by aggregation. The study suggests this material could be recycled and reused at least three times, offering a practical approach to nanoplastic remediation.
Tiny plastic particles, particularly nanoplastics, are becoming major threats to aquatic and biotic life owing to their unique physico-chemical characteristics. Thus, in the present work, biochar (BC) was fabricated using "Ulva prolifera green tide" as a biowaste raw material by slow pyrolysis technique to examine its potential in removing nanoplastics from the environment. The findings depicted that nanoplastics removal efficiency by BC was V-shaped with initial pH increased from 2 to 11, and the main removal mechanism changed from adsorption to heterogeneous aggregation between nanoplastics, biochar colloids, and leached substances from BC. When the solution pH crossed the pH of BC (2.3), the aggregation kinetics were well-fitted by the logistic model and displayed as an S-shaped curve with a lag period. Characterization results indicated that biochar colloids were the key enabler with a critical concentration of 72.01 mg L at neutral pH. Keeping in mind the removal mechanisms and contribution of biochar colloids, iron-modified biochar (Fe-BC) was produced to enhance the overall removal efficiency. The Fe-BC demonstrated a two-phase removal process of pre-adsorption and post-aggregation, successfully realized to minimize lag time and enhance aggregation performance. The theoretical removal capacity of Fe-BC against nanoplastics could reach up to 1626.3 mg g, which was three-fold higher than that of BC. Further, the Fe-BC was suggested to be recycled and reused at least three times by ultrasound, followed by co-pyrolysis for green and efficient degradation of nanoplastics. Overall, the findings offer a promising approach for removing and recycling nanoplastics in the environment.
More Papers Like This
Fe-Modified Sewage Sludge Biochar for Efficient Removal of Nanoplastics from Water: Mechanistic Insights and Multi-Pathway Adsorption Analysis
AI summary Read the abstract
Scientists developed a new water filter material made from sewage sludge and iron that can remove 96% of tiny plastic particles (called nanoplastics) from water. These microscopic plastic bits are found everywhere in our water supply and may pose health risks, but this new filter works much better than existing methods. This research could lead to better ways to clean nanoplastics from our drinking water while also recycling waste materials.
Effective removal of microplastics by filamentous algae and its magnetic biochar: Performance and mechanism
AI summary Read the abstract
Researchers found that filamentous algae and a magnetic biochar made from the algae can effectively remove microplastics from water, with the biochar absorbing over 215 milligrams of microplastics per gram. The algae naturally trap microplastics through entanglement and adhesion, while the magnetic biochar can be easily recovered from water using magnets. This dual approach could help address both algae bloom problems and microplastic contamination in urban water systems.
Efficient Removal of Micro-Sized Degradable PHBV Microplastics from Wastewater by a Functionalized Magnetic Nano Iron Oxides-Biochar Composite: Performance, Mechanisms, and Material Regeneration
AI summary Read the abstract
Researchers developed a magnetic iron oxide-biochar composite capable of removing biodegradable PHBV microplastics from wastewater with over 98% efficiency. The material worked through a combination of surface adsorption and magnetic separation, maintained performance across a wide pH range, and retained over 92% removal efficiency after four regeneration cycles.
Removal of micro- and nano-plastics from aqueous matrices using modified biochar – A review of synthesis, applications, interaction, and regeneration
AI summary Read the abstract
This review examines how modified biochar materials can be used to remove micro- and nanoplastics from water. Researchers found that chemical functionalization and nanoparticle integration of biochar significantly improve its ability to capture plastic particles through mechanisms like electrostatic interaction and physical adsorption. The study also highlights challenges in regenerating used biochar for sustainable reuse in water treatment applications.
Clean water production from plastic and heavy metal contaminated waters using redox-sensitive iron nanoparticle-loaded biochar
AI summary Read the abstract
Researchers developed a biochar material loaded with iron nanoparticles that can simultaneously remove nanoplastics and heavy metal ions from contaminated water. The material achieved over 90 percent removal across a range of water conditions and worked effectively in both batch and continuous-flow tests. The study presents a practical, low-cost approach for cleaning up water polluted with both plastic particles and toxic metals.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.