We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Optimizing electrokinetic remediation for pollutant removal and electroosmosis/dewatering using lateral anode configurations
Summary
Researchers developed a novel electrokinetic remediation approach using lateral anode configurations to improve pollutant removal and dewatering of contaminated soils. The new electrode arrangement demonstrated enhanced performance compared to conventional setups for treating soil contamination. The study suggests that optimized electrode design could make electrokinetic remediation a more effective tool for cleaning up various soil pollutants, including microplastics and other contaminants.
Soil electrokinetics (SEK) research has been widely used in various fields such as soil remediation, dewatering, land restoration, geophysics, sedimentation, pollution prevention, consolidation, and seed germination. According to our most recent published research on SEK process design modifications during the last 30 years (1993-2022), more than 150 designs have been introduced to assure SEK's maximum performance. Incorporating lateral electrodes/anodes was not documented in the existing literature, which motivated us to investigate the output of this design. In this study, we aimed to enhance the performance of the perforated cathode pipe soil electrokinetic remediation (SEKR) system (PCPSS) for removing inorganic pollutants by installing lateral anodes (LA-PCPSS) using two approaches. In the first approach, the LA-PCPSS was connected to different sources of applied voltages (DSAV) from different power supplies, while in the second approach, the entire operation system was connected to the same source of applied voltage (SSAV). We used the Taguchi approach (L9OA) to determine the optimal levels of applied voltages for the DSAV system. The results indicated that the DSAV-(LA-PCPSS) could be optimized at an applied voltage of 1 V cm-1 for the surface and the first and second lateral anodes. The indigenous Sr (elements found in the tested soil without artificial pollution) in kaolinite showed the best response among other elements (Ni and other indigenous elements) when optimizing the DSAV-(LA-PCPSS) using the Taguchi approach. Installing lateral anodes (position B) supplied to low applied voltage (0.5 V cm-1) improved the electroosmosis (EO) rate/dewatering. Reverse migration of ions was observed during the remediation of real contaminated soil using the SSAV-(LA-PCPSS). The DSAV-(LA-PCPSS) is considered an appropriate design for the SEKR of inorganic pollutants, and increases the EO flow/dewatering. Additionally, the increased energy consumption employing the DSAV-(LA-PCPSS) was extremely minimal compared to the traditional PCPSS, which is an economic advantage for SEKR research. The DSAV-(LA-PCPSS) is still under optimization/intensification process, and subsequent processes will be examined to achieve high efficiency.
Sign in to start a discussion.
More Papers Like This
Study on the Removal Effect of 3DEPs on Microplastics in Groundwater and Desalination Mechanism
Researchers tested three-dimensional electrode electrochemical technology for removing microplastics from groundwater and simultaneously desalinating it, achieving effective results under optimized conditions. The study presents a dual-function treatment approach for improving coastal groundwater quality.
Utilizing Electrosorption for Efficient Removal of Polyethylene Microplastics from Water: Critical Factors and Mechanistic Insights
Researchers developed an electrosorption method using graphite felt electrodes to remove tiny polyethylene microplastics from water. By optimizing voltage, flow rate, and salt concentration, they achieved a removal efficiency of nearly 97%. The study lays groundwork for a scalable technology that could help capture microplastics that slip through conventional wastewater treatment systems.
Utilizing Electrosorptionfor Efficient Removal ofPolyethylene Microplastics from Water: Critical Factors and MechanisticInsights
An electrosorption method was developed to remove polyethylene microplastics from wastewater, demonstrating improved removal efficiency compared to conventional treatment, especially for smaller particles that typically escape standard wastewater treatment plants.
The electrode strategy and its coordination mechanism in constructed wetland-microbial fuel cell (CW-MFC): a review
Researchers review how electrode design in constructed wetland-microbial fuel cells — systems that use bacteria in wetlands to generate electricity while cleaning wastewater — has evolved to improve power output and pollutant removal. Optimizing electrode materials, spacing, and configuration is key to scaling these systems up as a low-cost, sustainable water treatment technology.
Emerging electrochemical tools for microplastics remediation and sensing
This review examines emerging electrochemical approaches for both detecting and remediating microplastics in the environment, highlighting their advantages over traditional methods and identifying key challenges and opportunities for developing practical electrochemical tools to address microplastic pollution.