We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A PDA@ZIF-8-Incorporated PMIA TFN-FO Membrane for Seawater Desalination: Improving Water Flux and Anti-Fouling Performance
Summary
Researchers developed a thin-film nanocomposite forward osmosis membrane incorporating polydopamine-coated ZIF-8 metal-organic framework particles into a polyamide matrix for seawater desalination. The modified membrane showed improved water flux and salt rejection compared to conventional forward osmosis membranes.
Forward osmosis (FO) technology, known for its minimal energy requirements, excellent resistance to fouling, and significant commercial potential, shows enormous promise in the development of sustainable technologies, especially with regard to seawater desalination and wastewater. In this study, we improved the performance of the FO membrane in terms of its mechanical strength and hydrophilic properties. Generally, the water flux (Jw) of polyisophenylbenzamide (PMIA) thin-film composite (TFC)-FO membranes is still inadequate for industrial applications. Here, hydrophilic polydopamine (PDA)@ zeolitic imidazolate frameworks-8 (ZIF-8) nanomaterials and their integration into PMIA membranes using the interfacial polymerization (IP) method were investigated. The impact of PDA@ZIF-8 on membrane performance in both pressure-retarded osmosis (PRO) and forward osmosis (FO) modes was analyzed. The durability and fouling resistance of these membranes were evaluated over the long term. When the amount of ZIF-8@PDA incorporated in the membrane reached 0.05 wt% in the aqueous phase in the IP reaction, the Jw values for the PRO mode and FO mode were 12.09 LMH and 11.10 LMH, respectively. The reverse salt flux (Js)/Jw values for both modes decreased from 0.75 and 0.80 to 0.33 and 0.35, respectively. At the same time, the PRO and FO modes' properties were stable in a 15 h test. The incorporation of PDA@ZIF-8 facilitated the formation of water channels within the nanoparticle pores. Furthermore, the Js/Jw ratio decreased significantly, and the FO membranes containing PDA@ZIF-8 exhibited high flux recovery rates and superior resistance to membrane fouling. Therefore, PDA@ZIF-8-modified FO membranes have the potential for use in industrial applications in seawater desalination.
Sign in to start a discussion.
More Papers Like This
Interfacial Engineering of Sulfonated Polyethersulfone/ZIF‐8 Forward Osmosis Membranes: Applying Sulfonation and Interlayers for Enhanced Desalination Performance
Researchers engineered sulfonated polyethersulfone-based forward osmosis membranes with ZIF-8 interlayers, demonstrating that tunable sulfonation combined with MOF interlayer engineering substantially improved both water permeability and salt rejection.
Microplastics-resistant FO membranes: Zwitterionic MOF nanoparticles for superior fouling control
Researchers developed a new type of forward osmosis membrane modified with zwitterionic metal-organic framework nanoparticles to resist fouling by microplastics. The modified membranes showed a 73 percent improvement in water-attracting properties and only a 17 percent decline in water flow during fouling tests, compared to 60 percent for unmodified membranes. The technology could improve the efficiency of water treatment systems that need to handle microplastic-contaminated water.
Defect-engineered metal organic framework thin film nanocomposite membranes for enhanced forward osmosis performance and microplastic antifouling
Researchers engineered a new type of water filtration membrane by embedding specially designed metal-organic framework (MOF) particles into a thin film, achieving a three-fold increase in water flow rate while also becoming significantly more resistant to fouling by microplastics compared to standard membranes. The MOF particles were given controlled structural defects that created additional water transport pathways and made the membrane surface more water-attracting, reducing plastic particle adhesion. More efficient, fouling-resistant membranes could improve the viability of advanced water treatment systems for removing microplastics.
Dual modification of reverse osmosis membranes with NH2-MIL-125 and functionalised multiwalled carbon nanotubes for enhanced nanoplastic removal
Researchers developed a doubly modified reverse osmosis membrane by adding metal-organic framework particles to the support layer and carbon nanotubes to the filtering layer, achieving 98.4% salt rejection and significantly better resistance to nanoplastic fouling. This advanced membrane design could improve water treatment systems' ability to remove nanoplastics from drinking water.
Metal-organic framework membrane for waterborne micro/nanoplastics treatment
Researchers reviewed the potential of metal-organic framework (MOF) membranes — materials with highly tunable pore structures — to filter micro- and nanoplastics from water more effectively than conventional filtration. MOF membranes showed promise due to their adjustable surface chemistry and resistance to biological fouling, though challenges like particle clumping and structural stability still need to be resolved.