0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Human Health Effects Remediation Sign in to save

Valorization of coconut husk into biochar for lead (Pb 2+ ) adsorption

Green Processing and Synthesis 2025 Score: 48 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Adil Ahmed, Tarak Vora, G. Padmapriya, G. Padmapriya, R. P. Thakur, Rohit Sharma, Dona Mathew, Mahipal Singh Sankhla, Muhammad Khalid, Perumal Asaithambi

Summary

Researchers produced biochar from coconut husk and tested its effectiveness at adsorbing lead (Pb²⁺) from water, finding it to be a promising low-cost, sustainable material for removing toxic heavy metals from contaminated water sources.

Abstract Potentially toxic element contamination in water poses a significant environmental concern. Lead in divalent form (Pb 2+ ) is considered as highly toxic due to its wide number of applications in synthetic paint, metal smelting, and industrial applications and is harmful to the environment and public health. Researchers are exploring biochar production from biomass such as coconut husk biochar (CHBC) to achieve the objectives of sustainable development and circular economy. Thus, in this current study, we focused on the production, effectiveness, and characterization of CHBC as a cost-effective adsorbent for the elimination of Pb 2+ . In this regard, biochar was optimized at different temperatures of 200°C, 400°C and 600°C, and the best yield was obtained at 600°C. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies were conducted for further characterization, which showed an increase in the crystallinity of biochar from 56.4% to 64.3%, suggesting that the prepared biochar is highly porous. The prepared biochar was leveraged for the removal of Pb 2+ from water using varying concentrations, temperatures, and pH conditions, and the analysis was carried out using ultraviolet–visible (UV–vis) spectroscopy. The optimal parameters were found to be a molar concentration of 0.0125 M, a catalyst dose of 500 mg, room temperature, and a pH of 6. Adsorption follows Langmuir and Temkin isotherms, which appear to be well suited in the adsorption process based on the correlation coefficient of the linear graph ( R 2 = 0.97 and 0.99) and pseudo-first-order kinetics, with a correlation coefficient of R 2 = 0.546. The empirical results indicate that the usage of a pseudo-first-order kinetics model is well-matched in the adsorption process, and the evaluation was done by using UV–vis spectroscopy, while characterization was carried out using SEM–energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and XRD. Thus, the prepared biochar has been demonstrated to be an efficient platform for lead decontamination, paving the way for future researchers to explore and develop more effective techniques. This approach aligns with sustainable development goals and contributes to improved waste management practices.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Adsorption of Lead from Aqueous Solution by Biochar: A Review

This review summarizes research on using biochar, a low-cost carbon material, to adsorb and remove lead from contaminated water. The study covers how different raw materials and modification methods affect biochar's adsorption capacity, along with the main mechanisms by which lead is removed from aqueous solutions.

Article Tier 2

Pb(II) adsorption by biochar from co-pyrolysis of corn stalks and alkali-fused fly ash

Researchers created a modified biochar — a charcoal-like material made from plant waste — by combining corn stalks with fly ash during heating, and found it absorbed lead from water about 6% more effectively than standard biochar. The added binding sites from the fly ash modification make this a promising low-cost material for removing heavy metal pollution from contaminated water.

Article Tier 2

Evaluation of Efficient Pb Removal from Aqueous Solutions using Biochar Beads

Researchers developed alginate-biochar bead composites to improve the removal of lead from water compared to powdered biochar alone. The beads were easier to separate from solution and maintained high removal efficiency. This approach could make biochar-based heavy metal remediation more practical for real-world water treatment applications.

Article Tier 2

Effect of CeO2-Reinforcement on Pb Absorption by Coconut Coir-Derived Magnetic Biochar

Researchers prepared cerium oxide-doped magnetic biochar from coconut coir and found it significantly outperformed undoped magnetic biochar for removing lead from contaminated wastewater, with the CeO2 reinforcement providing additional adsorption sites that improved heavy metal uptake.

Article Tier 2

Functionalized Biochars for Enhanced Removal of Heavy Metals from Aqueous Solutions: Mechanism and Future Industrial Prospects

This review examined functionalized biochar materials as adsorbents for removing heavy metals from water, comparing surface modification strategies that enhance metal uptake capacity and selectivity. Functionalized biochars showed substantially improved adsorption performance over unmodified biochar and low-cost conventional materials.

Share this paper