0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Sign in to save

Effect of Washing Process on the Release of Microplastics from Polyester Fabrics

Separations 2025 Score: 38 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Tanja Pušić, Nino Dimitrov, Ana Šaravanja, Ivona Vidić Štrac, Tihana Dekanić

Summary

Researchers conducted an analytical evaluation of microplastic and fiber release from tri-color pile polyester fabrics during washing with detergent, employing multiple characterization methods on the fabric, wastewater, and filter cake before and after cryogenization to assess defragmentation and fiber shedding.

Study Type Environmental

Microplastics (MP), consisting of particles under 5 mm in size, and fibrous microplastics (FMPs), which originate from textiles and are shed during the washing process, are acknowledged as a new and expanding category of pollutants. This study aimed to conduct an analytical evaluation of the defragmentation process of polyester fabrics featuring a prominent tri-color pile surface. The evaluation involved washing the fabrics with detergent and water and employing various methods to assess the fabric, wastewater, and filter cake both prior to, and following, cryogenization. The specificity of a pile polyester fabric provided a baseline for evaluating the detergent and water system. Subjecting the polyester fabric to five cycles of washing in a detergent solution and water resulted in a measurable loss of mass. The pristine polyester fabric was analyzed microscopically and by FTIR, while the fabrics before and after washing were subjected to gravimetric analysis. The physico–chemical characteristics of the wastewater, such as the conductivity, turbidity, and chemical oxygen demand, were impacted by the composition of the washing bath. The application of pyrolysis, combined with gas chromatography and mass spectrometry (Py-GC/MS), on the filter cake demonstrated the value of using blank samples. The results indicated that both the detergent and the water significantly affected the release of FMPs during the washing process. Polyester fabric sample 1, which was washed in a detergent solution for five cycles, exhibited a mass loss of 1619 mg kg−1. In contrast, sample 2, consisting of a polyester fabric washed solely in water, showed a mass loss of 1707 mg kg−1 over the same number of cycles.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Quantification of shedding propensity of polyesterfabrics in the washing process

Researchers quantified microplastic shedding from three polyester fabric types — woven, knitted, and double-faced plush — under standardized washing conditions at 60°C using gravimetric analysis and physicochemical characterization of wastewater over 5- and 10-cycle wash experiments. Results showed fabric structure influences shedding propensity, and that the majority of fragments are released during the first washing cycles.

Article Tier 2

Microplastics in Wastewater by Washing Polyester Fabrics

Researchers investigated microplastic fiber release from polyester fabrics during washing, characterizing the quantity and types of microplastics generated and their potential pathway into wastewater systems as a significant source of environmental microplastic pollution.

Article Tier 2

Assessment of microplastics release from polyester fabrics: The impact of different washing conditions

Researchers assessed microplastic fiber release from polyester and polyamide fabrics during simulated washing, finding that fabric construction, fiber type, and washing conditions all influenced the quantity of fibers released. The study provides data to help quantify the contribution of laundry to microplastic emissions in wastewater.

Article Tier 2

Characterization of Microplastics Released Based on Polyester Fabric Construction during Washing and Drying

Researchers characterized microplastic fiber release from polyester fabrics during washing and drying, finding that fabric construction type significantly influences fiber shedding rates, with looser fabric structures releasing substantially more microplastic fibers per wash cycle.

Article Tier 2

The Effect of the Physical and Chemical Properties of Synthetic Fabrics on the Release of Microplastics during Washing and Drying

Researchers investigated how the physical and chemical properties of synthetic fabrics influence microplastic fiber release during washing and drying, finding that fabric construction, fiber type, and surface treatment are key determinants of the quantity and characteristics of released microplastic particles.

Share this paper