We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Development and validation of a low-cost modular in-line filtration apparatus for high-volume microplastic sampling in groundwater wells
AI summary Read the abstract
Researchers designed a low-cost (~$120) all-metal filtration system to collect microplastics from groundwater wells, capable of filtering over 500 liters per well with up to 96% particle recovery. The device addresses a major gap in monitoring — most microplastic sampling tools are too expensive or plastic-contaminated to work reliably in groundwater.
Microplastics are increasingly detected across environmental matrices, yet their presence and characterization in groundwater, particularly unconsolidated sediment aquifers, remains critically understudied. Sampling these systems is uniquely challenging due to recommended high extraction volumes (> 100 L), costly commercial filtration systems, and contamination risks associated with plastic-based sampling equipment. We developed a low-cost (~ USD $120), modular in-line filtration apparatus constructed from all-metal water-contact components, with silicone gaskets used only as sealing elements. The system is assembled from readily available hardware-store parts, compatible with multiple pump types, and configured as three sequential filtration modules fitted with stainless-steel meshes (200–270 μm, 110 μm, and ~ 30 μm) for size fractionation. Laboratory spike experiments were performed in triplicate using a peristaltic pump and a modified stainless-steel submersible pump. The apparatus achieved an average recovery of 96% with the peristaltic pump, including 98–100% recovery for fibers, foams, and films, and 75% for fragments. With the submersible pump, apparatus recovery was up to 76%, with particle losses attributed to retention within the pump housing rather than the in-line filtration system. Field deployment in three groundwater monitoring wells (11.7–39 m total depth) demonstrated effective operation while filtering ~ 500 L per well, with minimal leakage and no clogging. The apparatus can also be adapted for surface-water sampling using a peristaltic pump. This modular in-line filtration system provides an affordable and scalable approach for high-volume microplastic sampling in groundwater wells, addressing a critical gap in subsurface monitoring while minimizing contamination and enabling the collection of size-fractionated samples for subsequent analysis.
More Papers Like This
A Novel Application of Filtration for the Collection of Microplastics in Waterways
AI summary Read the abstract
Researchers developed a novel filtration system for collecting microplastics from waterways, demonstrating its effectiveness as a scalable and practical tool for environmental monitoring and plastic pollution assessment.
A novel in situ and graded sampling system for seawater microplastics
AI summary Read the abstract
Researchers built a new tool for collecting microplastics from seawater using fine filter layers instead of standard nets, which miss smaller particles. In a land-based test, the device recovered over 90% of test samples within five seconds and detected multiple plastic types, colors and shapes on its 100 and 50 micrometer filters that standard nets would miss.
Optimization of glass separating funnels to facilitate microplastic extraction from sediments
AI summary Read the abstract
Researchers improved a low-cost glass funnel device for separating microplastics from sediment by replacing a plastic stopcock with a silicone tube and Mohr clamp, achieving a 90% microplastic recovery rate in laboratory tests. This simple modification reduces contamination risk from plastic components in the equipment itself, a known problem with existing tools. Reliable and affordable extraction methods are foundational to accurate monitoring of microplastic levels in sediments worldwide.
Sampling and Identification of Microplastics in Groundwater
AI summary Read the abstract
Researchers presented a comprehensive protocol for sampling microplastics from groundwater boreholes, including a purpose-built filtration system and detailed laboratory analysis using ATR-FTIR spectroscopy to characterize particles by size, shape, color, transparency, and polymer chemistry. The protocol addresses a significant gap in the literature, as microplastic contamination in groundwater remains far less studied than in surface water environments.
Sampling and identification of microplastics in groundwater
AI summary Read the abstract
Researchers presented a comprehensive protocol for sampling microplastics from groundwater boreholes, including a purpose-built filtration system and detailed laboratory procedures using ATR-FTIR spectroscopy to characterize particles by size, shape, color, and polymer type. This record is a duplicate entry for the same groundwater microplastics sampling and identification methodology as paper 5527.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.