We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Analysis of Response Surface and Artificial Neural Network for Cr(Ⅵ) Removal Column Experiment
Summary
Despite its title referencing chromium removal, this paper focuses on using nano zero-valent iron loaded onto cellulose filter paper to remove hexavalent chromium (Cr(VI)) from contaminated water — not microplastics. It applies response surface methodology and artificial neural network modeling to optimize the process and is not relevant to microplastic pollution or human health.
In this study, inexpensive, environmentally friendly, and biodegradable cellulose filter paper was used to load nano zero-valent iron (nZVI), effectively improving the dispersibility of nZVI and successfully preparing the supported modified cellulose filter paper (FP-nZVI). Subsequently, the capacity of FP-nZVI to remove Cr(VI) in a flow system was explored. FP-nZVI was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Traditional single-factor experiments often require a large number of repeated experiments when analyzing the interactions among multiple variables, resulting in a long experimental cycle and high consumption of experimental materials. This research used the Response Surface Methodology (RSM) based on the Box-Behnken Design (BBD) and the Artificial Neural Network (ANN) to optimize and predict the removal process of Cr(VI). This RSM investigated the interactions between the response variable (Cr(VI) removal rate) and the independent variables (Cr(VI) concentration, pH value, and flow rate). A highly significant quadratic regression model was constructed, which was proven by a high F value (93.92), an extremely low p-value (<0.0001), and a high determination coefficient (R2 = 0.9918). An ANN model was established to forecast the correlation between independent variables and the removal rate of Cr(VI). Both models demonstrate remarkable consistency with the experimental data; however, from the perspective of statistical parameters, the ANN model has more significant advantages; the coefficient of determination R2 reaches 0.9937, which is higher than that of RSM (0.9918); the values of indicators such as MSE, RMSE, MAE, MAPE, AAD, and SEP are all smaller than those of RSM. The ANN exhibits greater excellence in prediction error, value fluctuation, and closeness to the actual value and has a more excellent prediction ability. The experiment for treating Cr(VI) with FP-nZVI was optimized, achieving good results. Meanwhile, it also provides a valuable reference for similar experimental studies.
Sign in to start a discussion.
More Papers Like This
Environmental remediation approaches by nanoscale zero valent iron (nZVI) based on its reductivity: a review
This review covers how nanoscale zero-valent iron particles can be used to clean up contaminated wastewater through chemical reduction of pollutants like heavy metals and organic compounds. While not directly about microplastics, these remediation technologies are relevant because they represent advanced approaches to treating the kinds of contaminated water that often also contains microplastic pollution.
One-Pot Synthesis of Lamellar Fe-Cu Bimetal-Decorated Reduced Graphene Oxide and Its Enhanced Removal of Cr(VI) from Water
This is not a microplastics study; it describes a graphene oxide material decorated with iron and copper nanoparticles for removing hexavalent chromium from water, achieving high removal capacity under acidic conditions via adsorption, reduction, and precipitation.
New Insight into the Performance and Self-Defensive Responses of the Algal–Bacterial Granular Sludge Process under Cr(VI)-Induced Stress
This paper is not about microplastics. It investigates how chromium(VI), a heavy metal contaminant, affects the performance of algal-bacterial granular sludge used in wastewater treatment, examining the microorganisms' stress responses and pollutant removal capabilities. The study focuses on heavy metal remediation technology with no connection to microplastic pollution.
Microplastics as an emerging vector of Cr(VI) in water: Correlation of aging properties and adsorption behavior
Researchers studied the correlation between aging properties and adsorption of hexavalent chromium Cr(VI) onto polyethylene microplastics under accelerated UV aging conditions, finding that aging-induced changes in surface chemistry increased the adsorption capacity. Aged microplastics may act as more effective vectors for toxic heavy metals in aquatic environments.
Polyamide microplastics as better environmental vectors of Cr(VI) in comparison to polyethylene and polypropylene microplastics
Researchers found that polyamide microplastics adsorb more hexavalent chromium (Cr(VI)) than polyethylene or polystyrene microplastics, with UV aging increasing adsorption capacity, making polyamide particles potentially more dangerous environmental vectors for this toxic heavy metal.