We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Application of 3D-Printed Membranes in Wastewater Treatment: A Review of Specific Waste Streams and Membrane Performance
AI summary Read the abstract
This review paper summarizes existing research on membranes made using 3D printing for treating wastewater. It describes how different materials and printing methods affect membrane performance, including reducing microplastic release, and covers uses such as filtering oily water and removing harmful chemicals like PFAS.
Membranes produced by 3D printing represent a groundbreaking technology for industrial and municipal wastewater treatment, enabling the fabrication of complex, customized architectures tailored to specific environmental challenges. Compared to conventional membranes fabricated via phase-inversion, 3D printing alternatives offer superior pore control and active catalytic functionality despite the higher initial costs. This review demonstrates how material selection and 3D printing methodologies establish improved structural and geometrical characteristics in the resulting membranes. Furthermore, it discusses the suitability of various membrane fabrication approaches relative to the specific demands of each application. Specifically, material selection—spanning polymers, ceramics, biopolymers, and nanocomposites—is discussed in light of printability requirements dictated by ink rheology, resolution, and post-processing across both light- and extrusion-based methods. Practical applications consider factors such as surface hydrophilicity tuning, pollutant affinity, structural durability, and the mitigation of microplastic release. In addition, leveraging biomimetic and minimal surface geometries can optimize hydrodynamics, reduce module size, and generate local fluid shear to suppress biofouling. A summary of reported case studies highlights the strong potential of 3D-printed membranes in applications such as membrane bioreactors, oil–water emulsion separations, organic dye degradation, and the removal of persistent micropollutants like PFAS. Finally, emerging trends—including 4D stimuli-responsive materials, AI-driven fluid dynamics, and upcycled green inks—are expected to guide 3D-printed membrane technology toward commercial scalability, particularly for decentralized water treatment solutions.
More Papers Like This
The Potential Role of Membrane Technology in the Removal of Microplastics from Wastewater
AI summary Read the abstract
This review examines membrane filtration as a technology for removing microplastics from wastewater, finding it promising but limited by issues of fouling and chemical instability. Improving membrane technology could significantly reduce the amount of microplastics discharged into waterways from treatment plants.
Preventing Microplastic Release into Oceans through Wastewater Treatment Technologies.
AI summary Read the abstract
Comparing immersed and sidestream membrane bioreactors for microplastic removal from wastewater, this analysis found membrane bioreactors more efficient than conventional treatment, identifying them as a key technology to prevent microplastic release to oceans.
Membrane Processes for Microplastic Removal
AI summary Read the abstract
This review evaluates the use of membrane technologies for removing microplastics and nanoplastics from wastewater treatment plant effluents. Researchers found that while membrane bioreactors show promise, most existing membrane approaches are still insufficient for comprehensive microplastic removal, especially for the smallest particles. The study suggests that specially designed membrane systems are needed as advanced tertiary treatment to prevent microplastic discharge into waterways.
Wastewater Treatment Methods for Removal of Microplastics from Effluents
AI summary Read the abstract
This book chapter reviewed pressure membrane technologies — including ultrafiltration, nanofiltration, and reverse osmosis — for removing microplastics and nanoplastics from wastewater effluents. The authors evaluate the performance, cost, and limitations of each membrane type and discuss how combinations of technologies can achieve higher removal efficiencies.
3D-printed, flow-through water filters for microplastic capture: The effect of surface porosity, column height, and pressure-sensitive adhesives on removal efficiency
AI summary Read the abstract
Researchers developed 3D-printed flow-through filtration columns using fused deposition modeling for microplastic capture from wastewater, testing the effects of surface porosity, column height, and pressure-sensitive adhesive coatings on removal efficiency. The customizable and scalable design demonstrates the potential of additive manufacturing to produce effective and adaptable microplastic filtration systems.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.