We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Detection of poly (vinyl chloride) microplastics through an optical fiber sensor: Effects of hydrodynamics and water matrix
AI summary Read the abstract
Researchers tested a light based sensor that detects tiny PVC plastic particles in water, which can come from aging pipes, by measuring changes in light passing through the device. In lab tests with still and flowing water, the sensor detected particles in both plain and tap water, with sensitivity varying by particle size and water flow conditions.
Aging of poly(vinyl) chloride (PVC) tap water pipes may release microplastics (MPs) into water. Optical fiber sensors that detect MPs by utilizing refractive index (RI) changes in the evanescent field offers potential for in situ detection. This study evaluates the effects of water matrix, MP sizes, and hydrodynamics on the response and sensitivity of optical fiber sensors for PVC-MP detection in water supply pipes. Under static conditions, samples were directly applied onto the sensing region, whereas dynamic experiments were conducted in a closed-loop flowing system under controlled flow rates. Optical responses were analyzed based on transmittance changes and wavelength shifts induced by RI variations following MP existence. The lab-prepared sensor is more sensitive against smaller MP (MP-80 μm) and exhibited a greater sensitivity under static conditions owing to relatively low settling velocity, which prolongs interaction with the evanescent field. Contrarily, larger MP (MP-140 μm) demonstrates an improved sensitivity under dynamic conditions, likely due to enhanced particle transport and increased interaction with the sensing region under flow. The highest sensitivity achieved was 0.93 for MP-mixed followed by 0.84 for MP-140 μm in deionized water (DI) water under dynamic conditions. Meanwhile, MP-80 μm exhibited the highest sensitivity of 0.49 under static conditions in DI water. The optical sensor can detect the MPs in both DI water and tap water with a slight drop in sensitivity, probably interfering with constituents in tap water. These findings demonstrate the feasibility and potential of optical fiber sensors for real-time and in-situ monitoring of PVC-MPs in water distribution systems.
More Papers Like This
Microplastics fluorescence detection using a fiber optic probe
AI summary Read the abstract
Researchers built a simplified, portable light sensor using an optical fiber to detect tiny plastic beads in water samples labeled with a glowing dye. The device successfully measured two types of dyed microplastic beads across a range of concentrations in laboratory water tests, using a small laser and a laptop-connected instrument.
A New Optical Method for Quantitative Detection of Microplastics in Water Based on Real-Time Fluorescence Analysis
AI summary Read the abstract
Researchers developed a new fluorescence-based particle counter for real-time quantitative detection of microplastics in water, validating the method against FTIR analysis on wastewater treatment plant samples containing polyethylene and PVC particles.
Fluorescence microfluidic system for real-time monitoring of PS and PVC sub-micron microplastics under flowing conditions
AI summary Read the abstract
Researchers developed a fluorescence microfluidic system for real-time monitoring of polystyrene and PVC sub-micron particles in water, demonstrating rapid detection capability suitable for continuous plastic pollution monitoring in water supplies.
Rapid and Selective Microplastics Detection in Water Using a Cost-Effective CS–TA-Functionalized E-SMS Optical Fiber Sensor
AI summary Read the abstract
Scientists have developed a cheap, fast sensor made from a specially coated optical fiber that can detect tiny traces of polyethylene—one of the most common plastics found in water—at extremely low levels. This matters because microplastics in our water supply are hard to detect with current tools, and better, more affordable detection methods could help researchers and water treatment facilities track contamination before it reaches our drinking water and bodies. While this is a promising step for monitoring technology, more research is needed to test it in real-world water sources beyond the lab.
Optofluidic light-droplet interaction for rapidly assessing the presence of plastic microspheres within aqueous suspensions
AI summary Read the abstract
Scientists developed a new device that can quickly detect tiny plastic particles (called microplastics) in water by shining light through water droplets and measuring how much light gets blocked. The device can spot extremely small amounts of plastic pollution - even particles smaller than the width of a human hair. This technology could help us better monitor plastic contamination in drinking water and the environment, which is important since these tiny plastics can harm both ecosystems and human health.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.