We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Mechanical properties of recycled plastic composites reinforced with construction and demolition waste using various particle sizes
AI summary Read the abstract
Researchers incorporated finely ground construction and demolition waste into a mixed recycled plastic matrix and found that smaller particle sizes (down to ~9–13 µm) improved tensile strength by up to 11% and elastic modulus by 7%, outperforming commercial nanoclay and demonstrating CDW as a viable reinforcing filler for recycled polymer composites.
Large volumes of plastic waste and construction and demolition waste (CDW) are generated globally. While the mechanical recycling of plastics often results in deteriorated material properties and the formation of polymer blends, the fine fraction of CDW lacks viable applications. This study addresses both challenges by converting these waste streams into valuable composite materials. Two CDW-derived fine fractions were examined: a mineral fraction composed of concrete and brick materials sourced from a demolition site, and a mixed CDW side-stream from a waste treatment plant containing concrete, ceramics, bricks, asphalt, gypsum, glass, plastics, and wood, with organics removed before filler processing. Both materials were subsequently ground into three particle sizes (∼74–85 μm, 18–19 μm, and 9–13 μm), yielding six distinct filler materials. These fillers were then incorporated into a heterogeneous plastic waste matrix (LDPE/HDPE/PP/PET; 35/35/20/20 wt%) at various loadings (1, 2.5, and 5 wt%), to assess the influence of particle size, filler content, and material characteristics on the overall reinforcing performance. The resulting composites, regardless of filler type and loading, exhibited an approximately 50% reduction in the standard deviation of tensile properties. Mechanical testing further revealed that reducing the particle size enhanced the mechanical performance of the composites, yielding up to an 11% increase in tensile strength and a 7% increase in elastic modulus. CDW-based composites also outperformed commercial nanoclay, which suffered from severe agglomeration and weak interfacial bonding with the recycled matrix. These outcomes demonstrate that CDW-origin fillers hold potential as reinforcing fillers for various polymeric applications.
More Papers Like This
Valorization of construction and demolition waste as reinforcing nanofiller for polymer composites
AI summary Read the abstract
Scientists found a clever way to recycle two problem wastes at once: they ground up leftover concrete and brick dust from demolition sites and used it to strengthen recycled plastic, making it just as sturdy (or sturdier) than plastic reinforced with commercial clay additives. This matters because it could reduce the amount of both plastic and construction debris piling up in landfills, while also potentially cutting down on new plastic production—an important step in addressing the broader plastic waste and microplastic pollution problem, since less waste means fewer opportunities for plastics to break down into the tiny particles now showing up in our water, food, and even
Recycled Mixed Plastic Fine Aggregate in Cement Concrete
AI summary Read the abstract
Cement concrete mixtures incorporating mixed post-consumer recycled plastic as fine aggregate were characterized, finding that an optimized blend of polymer types produced workable concrete with mechanical properties suitable for construction applications.
Investigating the Mechanical and Thermal Properties of Concrete with Recycled Nanoplastics for Enhanced Sustainability
AI summary Read the abstract
Researchers investigated the effects of incorporating recycled nanoplastics into concrete mixtures, evaluating the impact on mechanical properties including tensile, compressive, and splitting strength as well as thermal stability and insulation, framing nanoplastic waste as a potentially beneficial construction material additive.
Utilization of Recycled Plastic Waste as Partial Substitute of Fine Aggregate in Eco-Friendly Concrete
AI summary Read the abstract
Researchers tested recycled plastic waste as a replacement for fine aggregate (sand) in concrete, mixing it in at 0%, 10%, 20%, and 30%. Concrete with 10% plastic waste had the highest compressive strength, while plain concrete (0%) had the lowest, and strength declined slightly at 20% and 30%.
Potential Applications of Different Forms of Recycled Plastics as Construction Materials—A Review
AI summary Read the abstract
This review examined potential applications of different forms of recycled plastics (granules, powder, fiber, aggregate) as construction materials, identifying suitable recycling methodologies and construction products with performance benefits such as improved toughness and reduced weight.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.