We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends
AI summary Read the abstract
Researchers studied how blending poly(lactic acid) with poly(methyl methacrylate) at different ratios alters hydrolytic degradation, finding counterintuitively that increasing the biodegradable PLA fraction does not always accelerate breakdown — at higher PLA content, crystallization is favored during hydrolysis, producing a more degradation-resistant material.
Abstract The hydrolytic degradation of poly( l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry
More Papers Like This
Influence of alumina and PMMA on mechanical properties and aging behavior of 3D printed PLA composites: A comparative study
AI summary Read the abstract
Researchers investigated 3D-printed PLA composites blended with alumina or PMMA for biomedical applications, finding that PLA/alumina blends showed the greatest resistance to aging, with compressive strength increasing up to 60% after hydrolytic degradation compared to pure PLA, along with superior thermal stability and lower weight loss.
Hydrolytic Degradation and Assessment of Performance of PLA and PBS‐Based Plastics Designed for Packaging Applications
AI summary Read the abstract
Researchers studied the hydrolytic degradation of PLA- and PBS-based biopolymer composites under varying temperatures and pH levels to assess their suitability as food and cosmetic packaging. Temperature was the dominant factor driving material degradation, while pH had minimal effect, confirming these biocomposites are viable for packaging applications that avoid prolonged high-temperature exposure.
Impact of hydrolysis pretreatment on the compostability of biodegradable poly(caprolactone) and poly(lactic acid) films
AI summary Read the abstract
Researchers found that hydrolysis pretreatment significantly accelerates biodegradation of PLA plastic films in composting conditions by breaking down its amorphous regions and reducing molecular weight, while the same treatment had minimal effect on the already more biodegradable PCL polymer.
Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments
AI summary Read the abstract
Researchers investigated how biodegradable plastics PLA, PGA, and their copolymers PLGA degrade in simulated seawater, finding that hydrolysis of ester bonds drives breakdown and that higher glycolic acid content accelerates degradation. The amorphous regions degraded first, triggering crystallization and reduced thermal stability, offering insights for designing marine-degradable materials.
Degradation in marine conditions of 3D-printed PLA and PLP films
AI summary Read the abstract
Researchers evaluated the marine biodegradability of 3D-printed polylactic acid (PLA) and PLA modified with ionic liquids by exposing samples to seawater and using SEM, FTIR, TGA, and DSC analysis, assessing whether these materials offer viable biodegradable alternatives to conventional plastics contributing to ocean pollution.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.