0
Article Sign in to save

Deciphering the role of fungus in degradation of polypropylene from hospital waste

Worldwide Waste 2023 4 citations

AI summary Read the abstract

Researchers isolated a novel fungal strain (Ascotricha sinuosa SPF21) from a hospital waste dump site and demonstrated it could degrade polypropylene plastic by 25% within 90 days, with surface analysis confirming increased hydrophilicity and structural breakdown. The findings suggest this fungus holds promise as a biological tool for managing hospital plastic waste.

Polymers

Health and environmental consequences are unavoidable when it comes to management of hospital waste (HW) disposables. In order to eradicate the HW, this study isolated a novel fungus SPF21 from a hospital dumping yard to degrade Polypropylene (PP). We measured the attributes of PP inoculated with fungus using mass loss, Fourier trans-form infrared (FTIR), contact angle (CA), and scanning electron microscopy (SEM). The weight of PP exposed to SPF21 was reduced by 25% in 90 days. The SEM images reveal that there are pores all over the sample surface; they alsocaused voids during the biodegradation of PP. FTIR analysis indicates that the spectra of treated mask pieces show the absence of peak at 1746 cm-1 and the appearance of a new peak at 1643 cm-1 . A period of 90-day exposure to the fungal isolate SPF21 reduced the CA of PP by 44.8% when compared to the nonexposed PP samples, suggesting that the surface of PP turned more hydrophilic after exposure. Moreover, our study on PP degradation by the fungus Ascotricha sinuosa SPF21 appears to be promising from the perspective of environmental, health, and economic hazards. Our results indicate that biodegradation greatly facilitates fungus deposition and changes PP film morphology and hydrophilicity.

More Papers Like This

Article

ATR-FTIR characterisation of daily-use plastics mycodegradation

AI summary Read the abstract

This study tested four fungi (Funalia floccosa, Trametes versicolor, Pycnoporus cinnabarinus, and Penicillium oxalicum) for their ability to degrade six common plastics, using ATR-FTIR to track chemical changes. The best results were obtained with F. floccosa after 90-day treatment, degrading approximately 62% of high-density polyethylene, 23.6% of low-density polyethylene, and 35.6% of nylon based on band absorbance changes.

Article

Biodegradation of low-density polyethylene by mixed fungi composed of Alternaria sp. and Trametes sp. isolated from landfill sites

AI summary Read the abstract

Researchers isolated fungi from landfill sites and found that combining Alternaria sp. and Trametes sp. achieved 154% greater weight loss of heat-treated low-density polyethylene (LDPE) films after 30 days compared to untreated plastic. FTIR and electron microscopy confirmed surface degradation and polymer breakdown, suggesting mixed fungal consortia are more effective than single strains for biodegrading persistent plastic waste.

Article

A screening method for plastic-degrading fungi

AI summary Read the abstract

This study examined how weathering affects the physical and chemical properties of microplastic particles in marine environments. UV irradiation and mechanical abrasion altered surface chemistry and increased the release of chemical additives, making weathered microplastics potentially more hazardous than virgin particles.

Article

Pseudomonas aeruginosa SG01: A Novel Polyethylene-Degrading Bacterium in Petrochemical Wastewater

AI summary Read the abstract

Pseudomonas aeruginosa SG01, isolated from petrochemical wastewater sludge, degraded polyethylene films by increasing surface hydrophilicity and forming hydroxyl, carboxyl, and amide functional groups detectable by FTIR, with SEM confirming surface erosion pits. Identifying bacteria capable of breaking down PE offers potential bioremediation strategies for polyethylene microplastic contamination in industrial effluent and environmental settings.

Article

Investigating the Polystyrene (PS) Biodegradation Potential of Phanerochaete chrysosporium Strain NA3: A Newly Isolated Soil Fungus

AI summary Read the abstract

Researchers isolated a soil fungus, Phanerochaete chrysosporium strain NA3, and confirmed using FTIR, SEM, and CO2 evolution tests that it can biodegrade polystyrene films by producing enzymes that break polymer chains into carbonyl and hydroxyl groups, suggesting its potential for sustainable plastic waste upcycling under a circular economy model.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper