0
Article Sign in to save

Optimizing dual-layer composite membranes with functionalized CNT loadings using response surface methodology

Journal of Agriculture and Food Research 2024 1 citation

AI summary Read the abstract

Researchers optimized dual-layer polyethersulfone/polyamide nanofiltration membranes using response surface methodology and found that incorporating functionalized multi-walled carbon nanotubes into the substrate increased water permeability by approximately 20% while maintaining salt rejection performance governed by Donnan-exclusion mechanisms.

Polymers

ABSTRACT This study employed central composite design (CCD) within the framework of response surface methodology (RSM) to investigate the direct and interactive influences of critical synthesis parameters on the performance of polyethersulfone (PES)/polyamide (PA) double layer composite membranes for nanofiltration (NF) application. Independent variables included PES, piperazine (PIP), and trimesoyl chloride (TMC) concentrations, along with interfacial polymerization (IP) reaction time. The objective was to simultaneously optimize water permeability (WP) and salt rejection to achieve the highest NF membrane performance. Optimal parameters for maximum WP and salt rejection were determined: PES concentration at 14.0 wt%, PIP concentration at 1.5 w/v%, TMC concentration at 0.2 w/v%, and reaction time at 45 s. In addition, membrane performance was improved by incorporating functionalized multi-walled carbon nanotubes (f-MWCNTs) into the PES ultrafiltration substrate, enhancing hydrophilicity and porosity. The resulting PA NF membrane developed on a substrate containing 0.15 wt% f-MWCNT (TFNC) exhibited WP of 11.84 LMH/bar, surpassing the WP of the same NF membrane on an unloaded substrate (TFC) by approximately 20%, while maintaining nearly identical salt rejection levels. Salt rejection followed the order: Na2SO4 > MgSO4 > NaCl, suggesting Donnan-exclusion mechanisms primarily governed the separation process due to repulsion forces between the negatively charged membrane surface and anions.

More Papers Like This

Article Tier 2

Progress towards Stable and High-Performance Polyelectrolyte Multilayer Nanofiltration Membranes for Future Wastewater Treatment Applications

AI summary Read the abstract

This review evaluates polyelectrolyte multilayer nanofiltration membranes as an alternative to conventional thin-film composite membranes for wastewater treatment, highlighting recent advances in chemical resistance and fouling prevention that make them promising candidates for future water purification applications.

Article

Advancements in Organic Solvent Nanofiltration: The Critical Role of Polyamide Membranes in Sustainable Industrial Applications

AI summary Read the abstract

This review examines polyamide membranes as the leading material for organic solvent nanofiltration (OSN), highlighting how advances in nanostructured additives, interfacial polymerization, and crosslinking have improved selectivity and stability, while challenges such as fouling and solvent degradation continue to limit wider industrial adoption for sustainable chemical separations.

Article Tier 2

State-of-the-Art of Polymer/Fullerene C60 Nanocomposite Membranes for Water Treatment: Conceptions, Structural Diversity and Topographies

AI summary Read the abstract

This review surveyed the development of polymer/fullerene C60 nanocomposite membranes for water treatment, highlighting how fullerene's zero-dimensional structure and high surface area enhance membrane performance for desalination, nanofiltration, and microbial removal.

Article Tier 2

Dual modification of reverse osmosis membranes with NH2-MIL-125 and functionalised multiwalled carbon nanotubes for enhanced nanoplastic removal

AI summary Read the abstract

Researchers developed a doubly modified reverse osmosis membrane by adding metal-organic framework particles to the support layer and carbon nanotubes to the filtering layer, achieving 98.4% salt rejection and significantly better resistance to nanoplastic fouling. This advanced membrane design could improve water treatment systems' ability to remove nanoplastics from drinking water.

Article Tier 2

Double-ModifiedComposite Membranes with Organic FrameworkNanoparticles for Nanoplastics Removal: Insights from Density FunctionalTheory Modeling

AI summary Read the abstract

Researchers developed a dual-modified composite membrane integrating hydrogen-bonded organic framework nanoparticles into the polysulfone substrate and MIL-101(Cr) metal-organic framework nanoparticles into the polyamide active layer to simultaneously enhance water permeability, nanoplastic removal, and antifouling properties. Density functional theory modelling confirmed the interaction mechanisms between the framework materials and nanoplastic particles, supporting the design rationale.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper