0
Article Sign in to save

Fiber Showdown: A Comparative Analysis of Glass vs. Polypropylene Fibers in Hot-Mix Asphalt Fracture Resistance

Journal of the Faculty of Agriculture Kyushu University 2024 5 citations

AI summary Read the abstract

This study directly compares the performance of glass fibers and polypropylene fibers as reinforcement additives in concrete, evaluating properties such as tensile strength, crack resistance, and durability. Results help guide material selection for fiber-reinforced concrete applications where each fiber type offers distinct mechanical and environmental tradeoffs.

Polymers

Cracks in asphalt mixtures compromise the structural integrity of roads, increase maintenance costs, and shorten pavement lifespan. These cracks allow for water infiltration, accelerating pavement deterioration and jeopardizing vehicle safety. This research aims to evaluate the impact of synthetic fibers, specifically glass fiber (GF) and polypropylene fiber (PPF), on the crack resistance of Hot-Mix Asphalt (HMA). An optimal asphalt binder content of 5% was used in all sample designs. Using the dry mixing technique, GFs and PPFs were incorporated into the HMA at dosages of 0.50%, 1.00%, and 1.50% by weight of the aggregate. The effects of these fibers on the mechanical fracture properties of the HMA were assessed using Semi-Circular Bending (SCB), Indirect Tensile Asphalt Cracking Tests (IDEAL-CTs), and Three-Point Bending (3-PB) tests. This study focused on fracture parameters such as fracture work, peak load, fracture energy, and crack indices, including the Flexibility Index (FI) and Crack Resistance Index (CRI). The results from the SCB and IDEAL-CT tests showed that increasing GF content from 0.5% to 1.5% significantly enhances the flexibility and crack resistance of HMA, with FI, CRI, and CT Index values increasing by 247.5%, 55%, and 101.35%, respectively. Conversely, increasing PPF content increases the mixture’s stiffness and reduces its crack resistance. The PP-1 mixture exhibited higher FI and CT Index values, with increases of 31.1% and 10%, respectively, compared to the PP-0.5 mixture, based on SCB and IDEAL-CT test results. The SCB, IDEAL-CT, and 3-PB test results concluded that fibers significantly influence the fracture properties of bituminous mixtures, with a 1% reinforcement dosage of both PPFs and GFs being optimal for enhancing performance across various applications.

More Papers Like This

Article

The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study

AI summary Read the abstract

A feasibility study found that incorporating recycled waste plastics into asphalt via a dry-process method improved rutting and moisture-damage resistance when aggregates were pre-heated to higher temperatures. Diverting waste plastics into road construction represents a promising strategy to reduce the volume of plastic waste that would otherwise degrade into environmental microplastics.

Article

The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study

AI summary Read the abstract

Researchers used an in silico bioinformatics pipeline to identify two novel PETase enzyme candidates from thermophilic bacteria that show promising structural stability and robust hydrogen bonding for enhanced PET plastic degradation. This advances the search for enzymatic solutions to plastic pollution, potentially enabling biological breakdown of PET — a major source of microplastic fragments — under a wider range of environmental conditions.

Article Tier 2

Second Life for Plastic Fibre Waste Difficult to Recover: Partial Replacement of the Binder in Asphalt Concrete Mixtures by Dry Incorporation

AI summary Read the abstract

Researchers found that incorporating waste plastic fibers from municipal solid waste into asphalt concrete as a partial bitumen replacement improved resistance to plastic deformation and mechanical performance, with results approaching those of polymer-modified bitumen mixtures while improving material sustainability.

Review

Plastic roads: evaluating the role of waste PET in hot mix asphalt – a review

AI summary Read the abstract

This review examined the mechanical, environmental, and economic impacts of incorporating waste PET into hot-mix asphalt, finding optimal performance at 4–6% PET dosage improving rutting resistance, durability, and flexibility. Life cycle assessment studies reported a 47.4% reduction in global warming potential, though long-term field data remain limited and regulatory and processing barriers hinder large-scale adoption.

Article

Performance Evaluation of Post-Consumer and Post-Industrial Recycled Plastics as Binder Modifier in Asphalt Mixes

AI summary Read the abstract

This study evaluated post-industrial low-density polyethylene and post-consumer commingled polyethylene/polypropylene as bitumen modifiers for asphalt, finding that while higher plastic content improved cracking and rutting resistance, it also reduced storage stability and moisture resistance, with performance outcomes varying by plastic type and concentration.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper