0
Article Sign in to save

Comparative Analysis of Dielectric Behavior under Temperature and UV Radiation Exposure of Insulating Paints for Electrical Equipment Protection—The Necessity of a New Standard?

Journal of Psychology and Neuroscience 2024 1 citation

AI summary Read the abstract

This paper compares how different polymer materials respond to changing temperatures in terms of their dielectric properties, such as permittivity and loss factor. Understanding how plastics behave electrically under thermal stress is relevant for applications in electronics, cable insulation, and capacitors. The study provides benchmark data to guide material selection where thermal and electrical stability are both required.

Polymers

This paper describes the behavior of some epoxy, acrylic and polyurethane paints used in the protection of electrical equipment under the action of different degradation factors. The degradation factors chosen were temperature and UV radiation. The behavior of the paints under the action of these factors was interpreted by the variation of the tangent of the dielectric loss angle (tg Delta) as well as by FTIR and TG DSC analyses. Tg Delta was considered the reference dielectric characteristic because it best simulates the functionality of the material. The results presented in this paper lead to the conclusion that exposure to thermal cycles and UV radiation is necessary for each paint to give indications about their possibility of use in these conditions. At the same time, the evaluation of thermal stability, even if the exposure is at lower temperatures (than those at which we performed the tests) and/or for shorter periods, is very important for placing the paint in an insulation class. The tests that were the subject of this work provide us with the following information about the three types of paints analyzed: the highest resistance to thermal cycles is presented by S3, followed by S2 and then S1; thermal endurance tests place the polyurethane paint (S3) in insulation class E and the epoxy paint (S1) in insulation class B; and the tests to determine resistance to UV radiation qualify the best paint as acrylic (S2) and the worst as polyurethane (S3). Thus, it can be said that in applications where it is necessary for the protective film to withstand high temperatures, the use of S3 paint (polyurethane) is recommended, and in applications where the films are kept under the influence of UV radiation for a longer time, it is recommended to use coded paint S2 (acrylic). The results presented in this paper lead to the conclusion that the exposure to thermal cycles simulating the use in outdoor conditions and the resilience of paints under UV radiation conditions must be performed for each paint according to its specific use, and the dielectric characteristics must be carefully evaluated because they can reach values under the accepted limit—e.g., thermal stability evaluation—even if the exposure is at lower temperatures and/or for shorter periods. The conclusions of the experimental work must be generalized at different types of electrical insulating paints, and maybe a new standard is necessary to assess the paints’ behavior under usage conditions, with the paints needing to be treated separately from the classical polymeric insulation systems.

More Papers Like This

Article

Characterization of PVC/CaCO3 Nanocomposites Aged Under the Combined Effects of Temperature and UV-Radiation

AI summary Read the abstract

This study examined how micro- and nanoscale calcium carbonate fillers affect the aging resistance and dielectric properties of PVC composites under prolonged UV and thermal stress, finding that higher CaCO3 concentrations improved dielectric stability and that particle size and dispersion quality significantly influenced long-term material performance.

Article

Accelerated Aging Process of Carbon Black-Reinforced PVC (CB-PVC) Insulation by UVB-Induced Chemical Degradation

AI summary Read the abstract

Researchers examined how UVB radiation degrades carbon black-filled PVC composites, finding a 30% drop in dielectric strength and 28% increase in surface roughness after 500 hours of exposure. Degradation followed a three-phase pattern driven by radical propagation and photo-oxidation, revealing how UV exposure compromises cable insulation materials.

Article Tier 2

UV-Induced Aging in Thermochromic Pigment-Integrated Food-Grade Polymers: A Performance Assessment

AI summary Read the abstract

Food-grade polypropylene blends containing thermochromic pigments were exposed to simulated indoor and outdoor UV light for 500 and 1000 hours, revealing that UV degradation compromises both the visual temperature indicators and the mechanical properties of the polymer matrix.

Article Tier 2

Study on aging behavior of polyethylene glycol under three wavelengths of ultraviolet light irradiation

AI summary Read the abstract

This study investigated how UV irradiation at different wavelengths causes photo-aging and degradation of polyethylene glycol (PEG2000), a material used to conserve waterlogged wooden cultural artifacts. Understanding how UV breaks down polymer materials is relevant to modeling how plastics in the environment fragment into microplastics under sunlight.

Article Tier 2

UV-Induced Aging in Thermochromic Pigment-Integrated Food-Grade Polymers: A Performance Assessment

AI summary Read the abstract

Researchers tested how UV light exposure degrades food-grade polypropylene plastics that contain thermochromic pigments used as temperature indicators on packaging. They found that UV exposure caused significant color fading, mechanical weakening, and mass changes in the material over time. The results raise concerns about the long-term reliability of these temperature-sensitive plastics and their potential to generate microplastics as they degrade.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper